Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit: T19CM09345
Permit Details
Apply Date:
12/19/2019
Applicant:
BONILLAS LUPE T & RITA Q CP/RS
Description:
GAS RECONNECT
Outstanding Activity Conditions
Permit Number - T19CM09345
Permit Status: Final
Permit Description: GAS RECONNECT
Total Outstanding Activity Conditions - 1
| Date | Name |
|---|---|
| 12/19/2019 | PLANS EXPIRE IN 180 DAYS FROM DATE OF SUBMITTAL. PERMITS EXPIRE IN 180 DAYS FROM DATE OF ISSUE OR LAST INSPECTION. |
Completed Inspections
Permit Status: Final
Permit Number: T19CM09345
Permit Description: GAS RECONNECT
Total Completed Inspections - 4
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 12/27/2019 | PLUMBING - FINAL | TVALENCIA | Approved | 1- The air pressure test gage was just above 2 psi. The pressure test shall be a minimum of 10 psi. Check the system for leaks. 2- Shall provide (3) sheet metal screws per joint on furnace flu vent and remove the mechanical tape around the vent connector to the double wall flu vent. 3- Shall remove the flex connector on the water heater t & p drain and terminate it 6 inches above the floor. |
| 12/27/2019 | PLUMBING - GAS RECONNECT | TVALENCIA | Approved | 1- The air pressure test gage was just above 2 psi. The pressure test shall be a minimum of 10 psi. Check the system for leaks. 2- Shall provide (3) sheet metal screws per joint on furnace flu vent and remove the mechanical tape around the vent connector to the double wall flu vent. 3- Shall remove the flex connector on the water heater t & p drain and terminate it 6 inches above the floor. |
| 12/27/2019 | PLUMBING - GAS PRESSURE TEST | TVALENCIA | Approved | 1- The air pressure test gage was just above 2 psi. The pressure test shall be a minimum of 10 psi. Check the system for leaks. 2- Shall provide (3) sheet metal screws per joint on furnace flu vent and remove the mechanical tape around the vent connector to the double wall flu vent. 3- Shall remove the flex connector on the water heater t & p drain and terminate it 6 inches above the floor. |
| 01/06/2020 | GAS CLEARANCE | TVALENCIA | Approved |