Permit Review Detail
Review Status: Completed
Review Details: REVISION - - 2ND
Permit Number - T19CM07637
Review Name: REVISION - - 2ND
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 08/18/2020 | ROBERT SHERRY | PLUMBING-COMMERCIAL | REVIEW | Reqs Change | Comment not resolved. Include the following information regarding the vents for the propane-fired unit heaters on the drawings: the distance from the exterior wall to the listed terminal cap, size and slope of the vent, the type of vent pipe (i.e. single-wall or double wall), any required thimbles, and how the vent will be supported. [Second comment: Comment not addressed.] [Initial comment: Provide details for the installation of the unit heater vents. The details are to include the required dimensions from the heater to the exterior wall, the distance from the exterior wall to the listed terminal cap, size and slope of the vent, the type of vent pipe (i.e. single-wall or double wall), any required thimbles, and how the vent will be supported. Reference: Section 501.14, IFGC 2018.] |
| 08/26/2020 | ERIC NEWCOMB | BUILDING-COMMERCIAL | REVIEW | Reqs Change | 1. Previous Comment; Sheet A-4; Egress Plan: Per the IBC Section 1017.3, exit access travel distance shall be measured from the most remote point of each room or space along natural and unobstructed paths of horizontal and vertical (not diagonal) egress travel to an exit. Please revise this plan and indicate the maximum distance meets the requirements of the IBC Table 1017.2 (250' for F-1). 2. Previous Comment; Sheet A-4; Drinking Fountain: Per the IBC Section 1109.5.1, one drinking fountain shall comply with requirements for people in a wheelchair, and one drinking fountain shall comply with requirements for standing people. Use the 2009 ICC/ANSI Figure 602.5(b). 3. General: Please provide written responses to all review comments. |
Final Status
| Task End Date | Reviewer's Name | Type of Review | Description |
|---|---|---|---|
| 09/09/2020 | KROBLES1 | OUT TO CUSTOMER | Completed |