Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Completed
Review Details: RESUBMITTAL
Permit Number - T10CM00905
Review Name: RESUBMITTAL
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 06/01/2010 | RONALD BROWN | BUILDING-COMMERCIAL | REVIEW | Approved | |
| 06/03/2010 | RAY MAJUTA | ELECTRICAL-COMMERCIAL | REVIEW | Approved | |
| 06/04/2010 | ROBERT SHERRY | PLUMBING-COMMERCIAL | REVIEW | Denied | 1. Comment not resolved; indicate on the drawing the type of backflow prevention device to be employed with each appliance that requires a backflow preventer. It is not the contractor's responsibility to determine the correct type of backflow preventer. Appliances (e.g. ovens, ice makers, etc) to be directly connected to the water supply system that do not have listed, integral backflow preventers or integral air gaps conforming to Table 6-3, UPC 2006 require backflow prevention. Specify the type of backflow prevention device required for each water connection. Reference: Sections 602.3, 603.0, and Table 6-2, UPC 2006. 2. Hand sinks may not be indirectly connected to the drainage system. The waste pipe from a hand sink may be connected with the combination waste and vent system through the use of conventional waste and vent piping. Reference: Sections 304.0, 802.0, and 910.7, UPC 2006. |
| 06/04/2010 | ROBERT SHERRY | MECHANICAL-COMMERCIAL | REVIEW | Approved | |
| 06/07/2010 | STEVE SHIELDS | ZONING | REVIEW | Approved |
Final Status
| Task End Date | Reviewer's Name | Type of Review | Description |
|---|---|---|---|
| 06/08/2010 | SUE REEVES | OUT TO CUSTOMER | Completed |
| 06/08/2010 | SUE REEVES | REJECT SHELF | Completed |