Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Plan Review Detail
Review Status: Completed
Review Details: RESUBMITTAL - CDRC - FINAL PLAT REVIEW
Plan Number - S15-004
Review Name: RESUBMITTAL - CDRC - FINAL PLAT REVIEW
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 08/04/2015 | PGEHLEN1 | START | PLANS SUBMITTED | Completed | |
| 08/04/2015 | PATRICIA GEHLEN | ENGINEERING | REVIEW | Approv-Cond | Per 4th submittal comments |
| 08/04/2015 | PGEHLEN1 | UTILITIES | TUCSON ELECTRIC POWER | Approv-Cond | Good Morning Dan, The easement as shown will work. Thank you, Mary Burke Right of Way Agent Tucson Electric Power Co. Mail Stop HQE613 PO Box 711, Tucson, AZ 85702 Office - 520-917-8744 Cell - 520-401-9895 mburke@tep.com From: Daniel Castro [dcastro@rickengineering.com] Sent: Thursday, July 30, 2015 1:15 PM To: Burke, Mary; Leon, Charles Subject: [EXTERNAL E-Mail] RE: (REC 4148-A) Robb Hill Final Plat S15-004 Mary and Chuck - attached is pdf of revised electric easement. Now shows as 16’ wide and easement extends 30’ south of last pole to remain. Let me know if this works for you. Dan From: MBurke@tep.com [mailto:MBurke@tep.com] Sent: Thursday, July 30, 2015 12:17 PM To: Daniel Castro; CLeon@tep.com Subject: RE: (REC 4148-A) Robb Hill Final Plat S15-004 Dan, As long as Chuck is good with 30 feet, I am. Thanks, Mary From: Daniel Castro [mailto:dcastro@rickengineering.com] Sent: Thursday, July 30, 2015 12:02 PM To: Burke, Mary; Leon, Charles Subject: [EXTERNAL E-Mail] RE: (REC 4148-A) Robb Hill Final Plat S15-004 Mary – 16’ is doable. Regarding the easement length south of the last pole that is remaining, Chuck had mentioned 30 feet would be acceptable and that is what we are showing. Does it have to be 40’? Dan From: MBurke@tep.com [mailto:MBurke@tep.com] Sent: Thursday, July 30, 2015 11:36 AM To: Daniel Castro; CLeon@tep.com Subject: RE: (REC 4148-A) Robb Hill Final Plat S15-004 Hi Dan, TEP requires a 16 foot wide easement for our overhead facilities and I believe that’s what was on the earlier plan sheets that were sent over for review. Will that be do-able? Also just want to confirm that the easement length is at least 40 feet south of the last pole that is remaining. Thanks, Mary Burke Right of Way Agent Tucson Electric Power Co. Mail Stop HQE613 PO Box 711, Tucson, AZ 85702 Office - 520-917-8744 Cell - 520-401-9895 mburke@tep.com From: Daniel Castro [mailto:dcastro@rickengineering.com] Sent: Thursday, July 30, 2015 11:19 AM To: Burke, Mary; Leon, Charles Subject: [EXTERNAL E-Mail] (REC 4148-A) Robb Hill Final Plat S15-004 Importance: High Good Morning Mary and Chuck – Attached is a pdf copy of the Final Plat Sheet 2 showing the 15’ wide electric easement Chuck discussed with Bruce Paton and myself yesterday at our on-site meeting. Please let me know if this works for you guys and/or if you have any questions. If it looks good, I will then resubmit the Final Plat to the City and they will route the plat to Mary for final approval. Thanks, Dan Dan Castro ASSISTANT PROJECT Planner RICK ENGINEERING COMPANY 3945 East Fort Lowell Road / Suite 111 / Tucson, AZ 85712 t 520.795.1000 / f 520.322.6956 dcastro@rickengineering.com / www.rickengineering.com SAN DIEGO RIVERSIDE ORANGE SACRAMENTO SAN LUIS OBISPO DENVER TUCSON PHOENIX Civil Engineering / Transportation / Traffic Engineering & Planning / Urban Design & Planning Water Resources Engineering / Surveying & Mapping / Photogrammetry / High Definition Surveying GIS & Geospatial Technology Services / Storm Water & Environmental Services / Landscape Architecture Redevelopment & Urban Revitalization / Construction Management Services / Forensic Services WARNING: The information provided via electronic media is not guaranteed or warranted against any defects, including design, calculation, data translation or transmission errors or omissions. |
| 08/04/2015 | PATRICIA GEHLEN | ZONING-DECISION LETTER | REVIEW | Approv-Cond | COMMUNITY DESIGN REVIEW COMMITTEE PLANNING & DEVELOPMENT SERVICES August 4, 2015 Dan Castro/Rick Engineering Subject: S15-004Robb Hill Final Plat Dear Dan: The above referenced project has been CONDITIONALLY APPROVED by the Community Design Review Committee. Please make any necessary corrections and submit the following documents: 1 Executed Final Plat Double Matte Océ or Photo Mylar. 2 Title reports current within the last thirty (30) days. 1 Check made payable to "Pima County Recorder" in the amount of $20.00 per plat page plus a $4.00 handling fee, along with Consent to Dedicate and CC&R fees if applicable. Consent to Dedicate and CC&R fees are $9.00 for the first 5 pages and $1.00 for each additional page, if applicable. If the Consent to Dedicate is also a fixture filing, there is an additional $3 fee. If you are unsure of the fees, please call the County Recorders Office. 1 Original Set of Executed and notarized CC&R's document (if applicable) and Assurance Package (if applicable). 1 Copied Set of Executed and notarized CC&R's document (if applicable) and Assurance Package (if applicable). 1 CD with Digital Copy in PDF Format of Plat, CC&R's (if applicable) and Assurances (if applicable). 1 Pay remaining $202 due on final plat review Assurances (if applicable) must be reviewed by the City Attorney's Office prior to being presented to the Mayor and Council. Plats, CC&R's and assurances must be approved at the same Mayor and Council Meeting. Please expect 5-6 weeks from the date submitted to the date scheduled for Mayor and Council approval. Should you have any questions, please call me at (520) 837-4919. Sincerely, Patricia Gehlen Project Manager All comments for this case are available on our website at http://www.ci.tucson.az.us/dsd/ Via e-mail/PRO |
Final Status
| Task End Date | Reviewer's Name | Type of Review | Description |
|---|---|---|---|
| 08/18/2015 | AROMERO4 | OUT TO CUSTOMER | Completed |