Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Completed
Review Details: DEV STDS MODIFICATION REVIEW
Permit Number - DS20-18
Review Name: DEV STDS MODIFICATION REVIEW
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 02/11/2021 | SBEASLE1 | START | PLANS SUBMITTED | Completed | |
| 02/16/2021 | LMAKUS1 | ENV SVCS | REVIEW | Approved | Andy Vera Tue 2/9/2021 10:49 AM Hello Bill, Yes Yes Yes, the curb is acceptable for this DP. I did check the previous project you mentioned however the enclosures weren’t being utilized so unable to determine if the curb design is an acceptable long term option. I’m not certain of the next steps in order to obtain approval. Loren Makus may be able to provide clarification otherwise you’ll need to contact the CDRC manager. Thanks, Andy Vera, City of Tucson -Environmental Services Accounts Representative Supervisor, (520) 837-3798 ---------------------------- From: Bill Lambert <billl@vlmk.com> Sent: Monday, February 8, 2021 6:38 AM To: Andy Vera <Andy.Vera@tucsonaz.gov> Cc: Pat Tapia <Pat.Tapia@tucsonaz.gov>; Loren Makus <Loren.Makus@tucsonaz.gov>; Chris Palmateer <chris@vlmk.com> Subject: [EXTERNAL]RE: TAC2 (TSMR) Hello Andy, Thank you for taking the time to review this. I do have a few questions…see below. Please note: If I understand you correctly, you are asking that I simply make the enclosure 3-feet wider? Looking at the plan below this will make it 16’-6” on each side of the enclosure to the dock retaining wall. It is tight, but will work. Am I allowed to make the enclosure out of concrete to match the building? I also understand your comment to mean that we can use the concrete curb and NOT install the bollards...correct? Did you inspect the enclosures on the previous project that have the curbs to see if there are any issues there? It has been in use for a couple years now. What do I need to do to get the TSMR approved? Do I need to revise the TSMR and re-submit it? Or can I make these revisions and send you a new site detail sheet? |
| 02/16/2021 | LOREN MAKUS | ENGINEERING | REVIEW | Approved | |
| 02/16/2021 | SBEASLE1 | ZONING-DECISION LETTER | WRITE DECISION LETTER | Approved | This TSMR was approved on February 16, 2021 Approval conditions: none Case Number: DS20-18 Fees Due: $0 Thank you for the payment. Description: TSMR - Tucson Airport Center. Standard number 8-01.5.0, garbage enclosures. Address: 6818 S COUNTRY CLUB RD YOUR NEXT STEPS On the related Development Package, DP20-0173 : 1. Add the Case Number DS20-18 to the lower right-hand corner next to the title block on each sheet. 2. Add a general note that includes the Case Number, type of request, date of approval, modifications granted to the development package, and approval conditions imposed by reviewer comments, if any. 3. With your next DP20-0173 submittal, include the updated Development Package. Thank you. Sharon Beasley, Permit Specialist City of Tucson Planning and Development Services email: COTDSDPermits@TucsonAz.gov |
| 02/16/2021 | LMAKUS1 | ENV SVCS | REVIEW | Approved | 02/17/21 ES approves of TSMR DS20-18, 2nd submittal. Thanks, Andy Vera Andy.Vera@TucsonAz.gov |