Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Approved
Review Details: COMMERCIAL REVIEW - FULL v.3
Permit Number - TC-COM-1123-02690
Review Name: COMMERCIAL REVIEW - FULL v.3
Review Status: Approved
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 01/17/2024 | Bldg Permits - Post Review | REVIEW COMPLETED | |||
| 01/17/2024 | External Reviewers - SAFEBuilt | REVIEW COMPLETED | Structural(S) Reviewer Madeline Nelson mnelson@safebuilt.com Approved Reason: Date Completed : 12/22/2023 11:06:23 AM Building(B) Reviewer Keith Miller kmiller@safebuilt.com Approved Reason: Date Completed : 1/13/2024 11:28:50 AM Building review is approved. Subject to the field inspector's approval. Mechanical(M) Reviewer Jorge Valido jvalido@safebuilt.com Approved Reason: Date Completed : 1/12/2024 12:00:39 PM 1. Provide plans for spray booths. Provide manufacturer specifications. Show location of spray booths. Show Make up air openings and quantities - 2018 IMC Section 502 Required Systems i. Provide Mechanical Plans for owner provided/installed spray booths. Provide manufacturer specifications. Show location of spray booths. Show Make up air openings and quantities. Show all supply and exhaust duct work. If applicable Show all compressed air and lines. Show air compressor. - 2018 IMC Section 502 Required Systems - 2018 IBC – Section [A]107.2.1Information on construction documents(RESOLVED) 2. Provide Commercial Energy Calculations/Mechanical compliance Certificate - Heat Loads - 2018 IECC Section C403 Building Mechanical Systems - 2018 IECC Section C402 Building Envelope Requirements ( i. Mechanical compliance Certificate not included in submittal. - 2018 IECC Section C403 Building Mechanical Systems - 2018 IECC Section C402 Building Envelope Requirements (RESOLVED) Submittal 2 - Building Electrical(E) Reviewer Ron Ross rross@safebuilt.com Approved Reason: Date Completed : 12/21/2023 2:22:37 PM Plumbing(P) Reviewer Perry Hendershott phendershott@safebuilt.com Approved Reason: Date Completed : 1/14/2024 7:06:47 PM Third Plumbing Review: Resolved-1), Need to address bldg. plan review comment 5 -IPC 403.1, 404.2 Resolved 2). add gas system length & sizing table used to plan page P1.1 -IFGC 402.3 Resolved 3). Janitor Sink & adjacent Floor drain vents can't horizontally offset below flood rim of fixture - IPC 905.4 |
||
| 01/11/2024 | PDSD Application Completeness | REVIEW COMPLETED |