Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Requires Resubmit
Review Details: COMMERCIAL REVIEW - FULL v.3
Permit Number - TC-COM-1123-02602
Review Name: COMMERCIAL REVIEW - FULL v.3
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 01/22/2024 | Bldg Permits - Post Review | PENDING ASSIGNMENT | |||
| 01/22/2024 | External Reviewers - SAFEBuilt | REQUIRES RESUBMIT | Structural(S) Reviewer Keith Miller kmiller@safebuilt.com Approved Reason: Date Completed : 1/22/2024 2:36:04 PM Structural review is approved. Subject to the field inspector's approval. Building(B) Reviewer Keith Miller kmiller@safebuilt.com Denied Reason: Date Completed : 1/22/2024 2:33:57 PM 1) Unresolved - General, Sheets A100, A101: Specify the units that are being applied for on the drawing sheets. Include the drawings and scope of work being done for the dryer vent running through the second floor. Please revise all affected sheets. (2018 IBC section 107) Please clearly identify the units that are included in this permit and scope of work on the plans, not just the application. 2) Resolved - General: Include the details for the dryer duct route through the second floor and penetration of the horizontal fire-rated assembly separating the units. (2018 IBC section 1107, 717.6, 2018 IMC section 504.2) 3) Resolved - Sheet A100: Include the occupancy classification, R-1, R-2, R-3, or R-4. (2018 IBC section 310) 4) Resolved - Sheet MP1.1: A round 4" duct will not fit in a 2x4 wall without deformation. (2018 IMC section 504.8.2) 5) Resolved - Sheet MP1.1: Provide the dryer duct length and calculations. (2018 IMC section 504.8.4) 6) Resolved - Sheet MP2.1: Provide the gas piping details and pipe sizing. (2018 IBC section 107, 2018 IFGC 106.3.1) 7) Resolved - Sheet E2.0: The electrical panel schedules specify that the panes are rated for 125A, but they are on 150A breakers. Please coordinate the rating of the equipment and over current protection device sizes. (2017 NEC section 408.36) Mechanical(M) Reviewer Keith Miller kmiller@safebuilt.com Approved Reason: Date Completed : 1/22/2024 2:35:12 PM Mechanical review is approved. Subject to the field inspector's approval. Electrical(E) Reviewer Keith Miller kmiller@safebuilt.com Approved Reason: Date Completed : 1/22/2024 2:34:48 PM Electrical review is approved. Subject to the field inspector's approval. Plumbing(P) Reviewer Keith Miller kmiller@safebuilt.com Approved Reason: Date Completed : 1/22/2024 2:35:37 PM Plumbing review is approved. Subject to the field inspector's approval. |
||
| 01/19/2024 | PDSD Application Completeness | REVIEW COMPLETED |