Permit: TC-MDP-0326-00159
Permit Details
Status:
Inspections
Type:
Model Building Permit
Address:
9642 E WYNALDA DR
Address NEW:
9642 E WYNALDA DR
Apply Date:
04/17/2026
Applicant:
Celina Rodriguez
Description:
Mirador Point 1512.225 (2024 IRC) (Model Master Plan TC-MDP-0226-00088)
Permit Reviews
Permit Number - TC-MDP-0326-00159
Permit Status: Inspections
Permit Description: Mirador Point 1512.225 (2024 IRC) (Model Master Plan TC-MDP-0226-00088)
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 04/20/2026 | SITE FROM MODEL PERMIT - SUBDIVISION v.1 | 04/29/2026 | APPROVED |
Outstanding Activity Conditions
Permit Number - TC-MDP-0326-00159
Permit Status: Inspections
Permit Description: Mirador Point 1512.225 (2024 IRC) (Model Master Plan TC-MDP-0226-00088)
Total Outstanding Activity Conditions - 5
| Date | Name |
|---|---|
| 03/13/2026 | Submit the Air Leakage & Duct Tightness Test Report completed by an Approved Special Inspector prior to Final Inspections. |
| 03/13/2026 | SPECIAL INSPECTION FOR POST TENSION SLAB IS REQUIRED. |
| 04/24/2026 | SPECIAL INSPECTION FOR CONCRETE INSTALLATION IS REQUIRED. |
| 04/24/2026 | Post-Installed Anchor Inspection Report is required. |
| 04/24/2026 | SPECIAL INSPECTION FOR SITE PREPARATION IS REQUIRED. |
Conditions
Permit Number - TC-MDP-0326-00159
Permit Status: Inspections
Permit Description: Mirador Point 1512.225 (2024 IRC) (Model Master Plan TC-MDP-0226-00088)
| Date | Description | Comments |
|---|---|---|
| 03/13/2026 | Separate submittal to PC RWRD is required for new connections to sewer, new water meters and upsized water meters. For review and assessment: apply online at https://permits.pima.gov/ or contact us at sewer@pima.gov, (520) 724-9900. | |
| 04/24/2026 | Sewer condition must be accepted and released by Pima County prior to issuance of a Temporary Certificate of Occupancy. For More Information visit https://www.pima.gov/1076/Sewer-Connection-Permits, To check your permit status https://permits.pima.gov/ | |
| 03/13/2026 | Truss/Joist Design plans must be submitted and approved prior to intermediate inspections if residential building or finaling the permit if commercial building. |
Outstanding Inspections
Permit Status: Inspections
Permit Number: TC-MDP-0326-00159
Permite Description: Mirador Point 1512.225 (2024 IRC) (Model Master Plan TC-MDP-0226-00088)
Total Outstanding Inspections - 4
| Last Inspection Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 06/01/2026 | BULD - Electrical Clearance | N/A | Not Ready | |
| 07/10/2026 | COT - RSBU - Interior Shear Bracing | N/A | Re-inspection required | 7-10-2026 fasteners need to be no less then 3/8" from edge [throughout] fastener should not penetrate drywall more than eighth of an inch (1/8") also fasteners should be placed at 12 inches on center throughout. Please re-walk before calling it in. Sheer wall was correct. |
| 09/10/2026 | COT - BULD - SWG Clearance | N/A | Not Applicable | |
| 09/18/2026 | RSBU - Building Final | N/A | Partial Pass |
Completed Inspections
Permit Status: Inspections
Permit Number: TC-MDP-0326-00159
Permit Description: Mirador Point 1512.225 (2024 IRC) (Model Master Plan TC-MDP-0226-00088)
Total Completed Inspections - 18