Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit: TC-COM-0525-00921
Permit Details
Status:
Issued
Type:
Commercial Building
Address:
330 E CORONA RD BLDG 3
Address NEW:
330 E CORONA RD BLDG 3
Apply Date:
05/05/2025
Applicant:
Matthew Uselton
Description:
Our goal is to remove the existing evaporative cooler and replace it with a heat pump package unit. The only structural changes in this job is to cut a 14 inch hole in the roof and a 20x20 square hole in the hallway ceiling for the new return flex duct. A heat pump unit and a curb will be installed where the evaporative cooler is currently. For the electrical, we are tapping into the old swamp cooler disconnect for the new HVAC disconnect. We will be rewiring the old evaporative cooker disconnect for 240v and adding a 30 amp 2 pull breaker.
Permit Reviews
Permit Number - TC-COM-0525-00921
Permit Status: Issued
Permit Description: Our goal is to remove the existing evaporative cooler and replace it with a heat pump package unit. The only structural changes in this job is to cut a 14 inch hole in the roof and a 20x20 square hole in the hallway ceiling for the new return flex duct. A heat pump unit and a curb will be installed where the evaporative cooler is currently. For the electrical, we are tapping into the old swamp cooler disconnect for the new HVAC disconnect. We will be rewiring the old evaporative cooker disconnect for 240v and adding a 30 amp 2 pull breaker.
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 05/09/2025 | COMMERCIAL REVIEW - FULL v.1 | 06/03/2025 | APPROVED |
| 07/08/2025 | RESTAMP - COMMERCIAL v.1 | 07/08/2025 | APPROVED |
Outstanding Activity Conditions
Permit Number - TC-COM-0525-00921
Permit Status: Issued
Permit Description: Our goal is to remove the existing evaporative cooler and replace it with a heat pump package unit. The only structural changes in this job is to cut a 14 inch hole in the roof and a 20x20 square hole in the hallway ceiling for the new return flex duct. A heat pump unit and a curb will be installed where the evaporative cooler is currently. For the electrical, we are tapping into the old swamp cooler disconnect for the new HVAC disconnect. We will be rewiring the old evaporative cooker disconnect for 240v and adding a 30 amp 2 pull breaker.
Total Outstanding Activity Conditions - 2
| Date | Name |
|---|---|
| 06/02/2025 | AIR BALANCING REPORT IS REQUIRED. |
| 06/02/2025 | Submit the Air Leakage & Duct Tightness Test Report completed by an Approved Special Inspector prior to Final Inspections. |
Conditions
Permit Number - TC-COM-0525-00921
Permit Status: Issued
Permit Description: Our goal is to remove the existing evaporative cooler and replace it with a heat pump package unit. The only structural changes in this job is to cut a 14 inch hole in the roof and a 20x20 square hole in the hallway ceiling for the new return flex duct. A heat pump unit and a curb will be installed where the evaporative cooler is currently. For the electrical, we are tapping into the old swamp cooler disconnect for the new HVAC disconnect. We will be rewiring the old evaporative cooker disconnect for 240v and adding a 30 amp 2 pull breaker.
| Date | Description | Comments |
|---|---|---|
| 06/05/2025 | Please identify the individual unit number associated with this permit in the address section on the construction plan |