Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit: T99CM01784
Permit Details
Apply Date:
04/15/1999
Applicant:
RFA INC
Description:
CHEVRON GAS STATION
Contractors:
- DOLAN CONSTRUCTION CO INC ,
Completed Inspections
Permit Status: C of o
Permit Number: T99CM01784
Permit Description: CHEVRON GAS STATION
Total Completed Inspections - 10
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 11/09/1999 | ELECTRIC - UFER | RSUBA | Approved | IVRS - Inspection 0000* |
| 11/09/1999 | ELECTRIC - UFER | RSUBA | Approved | ADDTL COMMS - PER 250-50 (C) CONCRETE ENCASED ELECTRODE (UFER) INSTALL WITHIN AND NEAR THE BOTTOM OF THE FOOTING THAT IS DIRECT CONTACT WITH THE EARTH (ENCASED BY 2 OR CONCRETE) |
| 11/15/1999 | ELECTRIC - UNDERGROUND | RSUBA | Approved | IVRS - Inspection 0000* |
| 11/30/1999 | STEM WALL/RETAINING WALL | DWITT | Approved | IVRS - Inspection 0000* |
| 12/02/1999 | ELECTRIC - INTERMEDIATE | RSUBA | Approved | IVRS - Inspection 0000* |
| 12/02/1999 | FRAMING | DWITT | Approved | ADDTL COMMS - FINISH NAILING WALL SHEATHING, REPLACE MISSING BLOCKS & COMPLETE BOTTOM PLATE HARDWARE. BLOCK THE CORNER NEAR THE NORTHWEST CORNER OF BLDG & PROVIDE S/R NAILERS. TIGHTEN NUTS ON BEAM SEAT (BOLTS). COMPLETE HE-15S. PROVIDE MACHINE BOLTS @BEAM SEAT AT N.E. CORNER. HAVE PROJECT ENGINEER APPROVE OSB IN LIEU OF CDX/ CONFIRM EDGE DISTANCE TO PERIMETER NAILS IN SHTG IS NOT LESS THAN 3/8. |
| 12/03/1999 | MECHANICAL - INTERMEDIATE | JMILITEL | Approved | IVRS - Inspection 0000* |
| 12/06/1999 | REINFORCED MASONRY PRE-GROUT | DWITT | Approved | ADDTL COMMS - TRASH ENCLOSURE |
| 12/14/1999 | SHEET ROCK NAILING | DWITT | Approved | ADDTL COMMS - 1. FINISH HANGING. 2. FINISH SCREWING 3. ARE FIRE BLOCKS COMPLETE AS NOTED DURING FRAME /INSP? |
| 12/30/1999 | ELECTRIC - ABOVE CEILING | RSUBA | Approved | IVRS - Inspection 0000* |