Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit: T03CM05310
Permit Details
Apply Date:
11/07/2003
Applicant:
ROBERT HARRIS
Description:
UPGRADE:ELECTRIC/PLUMBING/MECHANICAL/T03VL00784
Permit Reviews
Permit Number - T03CM05310
Permit Status: Expired
Permit Description: UPGRADE:ELECTRIC/PLUMBING/MECHANICAL/T03VL00784
| Start Date | Submittal | Complete Date | Status |
|---|---|---|---|
| 01/30/2004 | REVISION | 01/30/2004 | COMPLETED |
| 11/07/2003 | OTHER | 12/05/2003 | COMPLETED |
Outstanding Activity Conditions
Permit Number - T03CM05310
Permit Status: Expired
Permit Description: UPGRADE:ELECTRIC/PLUMBING/MECHANICAL/T03VL00784
Total Outstanding Activity Conditions - 1
| Date | Name |
|---|---|
| 11/07/2003 | PLANS EXPIRE IN 180 DAYS FROM DATE OF SUBMITTAL. PERMITS EXPIRE IN 180 DAYS FROM DATE OF ISSUE OR LAST INSPECTION. |
Outstanding Inspections
Permit Status: Expired
Permit Number: T03CM05310
Permite Description: UPGRADE:ELECTRIC/PLUMBING/MECHANICAL/T03VL00784
Total Outstanding Inspections - 3
| Last Inspection Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| PLUMBING - FINAL | N/A | Not Inspected | ||
| MECHANICAL - FINAL | N/A | Not Inspected | ||
| 02/13/2006 | ELECTRIC - FINAL | N/A | Denied | 1) VACUUM BREAKERS HOSE BIBS 2) BEDROOM CIRCUITS MUST BE ARC FAULT PROTECTED 3) INSTALL ANTI-TILT AT STOVE 4) PROVIDE 1" CLEARANCE FROM COMBUSTIBLES AT WATER HEATER FLUE 5) MISSING DEAD FRONT COVER ALL CONDENSOR DISCONNECT 6) SECURE A/C DISCONNECT LIQUID TIGHT 12" FROM BOX |
Completed Inspections
Permit Status: Expired
Permit Number: T03CM05310
Permit Description: UPGRADE:ELECTRIC/PLUMBING/MECHANICAL/T03VL00784
Total Completed Inspections - 7
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 03/05/2004 | PLUMBING - YARD WTR LINE/TEST | FGREER | Approved | IVRS - Inspection 0000* |
| 03/12/2004 | PLUMBING - GAS PRESSURE TEST | BSTEVENS | Approved | IVRS - Inspection 0000* |
| 03/23/2004 | PLUMBING - INTERMEDIATE | BSTEVENS | Approved | IVRS - Inspection 0000* |
| 03/23/2004 | ELECTRIC - SERVICE UPGRADE | BSTEVENS | Approved | IVRS - Inspection 0000* |
| 03/24/2004 | TEP CLEARANCE - AM | SREEVES | Approved | |
| 04/29/2004 | MECHANICAL - INTERMEDIATE | RFREIDIN | Approved | IVRS - Inspection :* |
| 04/29/2004 | ELECTRIC - INTERMEDIATE | RFREIDIN | Approved | IVRS - Inspection :*/ 1) AIR HANDLER IN ATTIC, HAS A U.L. LABEL MARK THE SPACE NEXT TO THE HEAT STRIP THAT'S INSIDE 2) YOU NEED A ACCESS HOLE TO SERVICE THE UNIT, ALSO A WORKING PLATFORM AND WALK WAY IF THE ACCESS HOLE IS NOT WITHIN WORKING DISTANCE OF THE UNIT, FRAMING MUST BE STRONG ENOUGH TO SUPPORT A LIVE LOAD 3) YOU NEED AN OVER FLOW PAN AND SECONDARY DRAIN TO OUTSIDE 4) YOU WILL NEED A DISCONNECT, FUSE PROTECTION THEIR OR AT SERVICE 5) WHEN LABEL IS MARKED CIRCUIT AMPACITY AND FUSE SIZE CAN BE DETERMINED 6) BLOCK AROUND YOUR MECH DUCT OPENINGS IN EACH ROOM AT CEILING 7) PLAN CALLS FOR ALL EXHAUST FAN IN BATHROOM 8) YOU NEED TO ADDRESS MANU FRAMING ITEMS, INCLUDING THE EXTRA WEIGHT OF ATTIC UNIT MAINTENCE LIVE LOAD EXT. 9) YOU HAVE A GALVANIZED 1" PIPE TAPPED INTO SEWER VENT VENTS OPEN TO ATTIC 10) NO ELECTRIC PAGE IN PLAN SET 11) RANGE HOOD/EXHAUST ? |