Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Parcel Search: 110112870
Parcel Search
Parcel Attributes
| Parcel | 110112870 |
|---|---|
| Jurisdiction | Tucson, Pima County |
| City of Tucson Zoning | R-3 |
| Tucson Ward | Ward 2 |
| Tucson Registered Neighborhood | Glenn Heights |
| Pima County Data | Assessor, Recorder, Treasurer, ... |
| Parcel Map | Map |
| Parcel Attributes Issue? | |
Annexations & Original City Zoning (OCZ)
Date - 12/11/2025 1:24 p.m.
Total Number Of OZC Plans - (1)
Permits
Parcel Number - 110112870
Date - 12/11/2025 1:24 p.m.
Total Number Of Permits - (1)
| Permit | Permit Status | Entered Date | Expired Date | Unit | Type | Description |
|---|---|---|---|---|---|---|
| TC-COM-0525-00977 | Expired | 05/13/2025 | N/A | UNIT 3 | Commercial Building | 3a We will have a 20 ft section of 1” pipe along the wall, then 10ft up to the roof, we will then drill a hole through the block wall running pipe along with 5ft toward the furnace. we will install a 1x3/4 tee on roof and run a 2ft section of 3/4 pipe to furnace installing a new gas shut off valve and supply line we will then go into unit cut drywall and drill a hole and run a new 10ft section of 3/4 pipe down into unit to water heater installing a gas valve and supply line. Once the repair is complete, we will put the unit on test and check for leaks. Once no leaks are found, we will clean up all debris. 3d We will run a 20ft section of 1” pipe from the meter up to roof once on roof we will drill a hole through block wall run a 5ft section of 1” pipe to furnace once at furnace we will go into unit and cut a section of drywall drilling a hole up to roof. Once hole is made we will install a 1”x3/4 tee on roof and run a 2ft section of 3/4 pipe to furnace installing a new gas shut off valve and supply line we will then go into unit cut drywall and run a 3/4 pipe down into unit to water heater installing a gas valve and supply line. Once the repair is complete, we will put the unit on test and check for leaks. Once no leaks are found, we will clean up all debris. |