Inspection History Details
Inspection Status: Re-inspection required
Inspection History: BULD - Electrical Clearance
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| BULD - Electrical Clearance | Re-inspection required | customer was advised to remove insulation and drywall to expose framing and all electrical and plumbing and recall for intermediates prior to doing a electrical clearance on the new panel. The sub panel is improperly installed and must all wiring needs to be in place so that when the cut over is done, they will not be without power inside their existing house and the addition, so please wire branch circuits. | ||
| 07/15/2026 | BULD - Electrical Clearance | Passed | Previous inspector notes have not yet been addressed. Additional items include: seal all penetrations through top plate HVAC ducts must be secured every 4 feet Relieve cinch/choke points created at ductwork by waterlines, gas lines, and improper angles Inspection stopped, site not ready, re walk and correct all notes current and previous as listed by inspectors. |