Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Complete (Recurring)
Inspection History: COT - ENGR - Signage Final
Permit Number - T18OT00619
Inspection Description - COT - ENGR - Signage Final
Inspection Status - Complete (Recurring)
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 03/18/2019 | COT - ENGR - Signage Final | Complete (Recurring) | {Activity date: 03/18/2019; Status: Continued; Inspector: Hthrall; Comment: Entered by HTHRALL1 - SEE NEW PERMIT T19OT00252 NOTES. This Submittal is both a revision to the wall signs permitted & installed under T18OT00989, and a full proposal for freestanding signs to vary code. As such - this permit -T18ot00619 - is being closed due to it's age from last review in July 2018, and a new permit number for the full master sign program to be processed in 2019 is now listed under T19OT00252. This will be the 4th review, but under a new permit number.} ; {Activity date: 03/04/2019; Status: Continued; Inspector: Hthrall; Comment: Entered by HTHRALL1 - Revision received from contractor for Banner Center Center detached signs.} ; {Activity date: 07/25/2018; Status: Continued; Inspector: hTHRALL; Comment: Entered by HTHRALL1 - RE: sign permit review For: 4 wall signs / 10 freestanding signs Site: 3838 N Campbell Avenue, Banner UMC Cancer Center Zoning: PAD-11 (based off of OCR-1 commercial) Reviewer: Heather Thrall Date: 7/24/18 (2nd review - referral for Master Sign Program) Permit T18OT00619 Plan corrections, should a permit be issued as a result of any potential Master Sign Program approval: 1) SIGN TYPE C: Provide electrical specifications: shut off switches & timers (per NEC 600 & OLC Ch. 4) 2) SIGN TYPE D: resubmittal has solar panel mast. Provide data on any associated battery for additional power source. Show shut off switch. 3) Mounting detail unaddressed for Sign B to have a new pan mounted to the masonry. 4) Per 7A.4.5.B, Understood engineering and special inspections will be provided/required for all sign structures exceeding 100 square foot in sign area (except existing structure "Sign B" in the submittal), only should the Master Sign Program request be approved. 5) All signs - again -provide mounting details for any pending any permit release. May be provided as a list next to each sign type (i.e. type /size/ number of screws/bolts, etc, field welding.) 6) 6) 7A.4.5.C, engineering and special inspection required for wall signs in exceess of 30' off the ground. Understood will be provided should the Master Sign Program request be approved. 7) REVISIONS SHOULD BE EMAILED TO HEATHER.THRALL@TUCSONAZ.GOV **The following comments noted with asterisks are referrals to the Master Sign Program, to vary specific design criteria, based off the underlying OCR-1 commercial zoning base of the PAD-11 zoning of the property. The following comments are for the SDRC to understand differences in sign design criteria in code versus signage aspects proposed.** NOTE: 7A.11.4. A property owner in a PAD district shall use the sign standards of the zone upon which the PAD regulation is modeled or may submit a master sign program. Signage proposed meets criteria outlined for signs within the PAD-11 zoning document. Freestanding Sign Types - Code reference section: UDC 7A.10.2.C.2.a. Freestanding Signs, (1) General Standards Freestanding pole sign requirements: Allowed only in the general business zone category and industrial zone category. (Clarification - based on OCR-1 underlying zone, pole signs would be permitted). A) Regarding sign B: **Sign B, off Allen Road frontage, is an existing structure, with a new display of raised lettering/components at 82.5 sq.ft. This sign exceeds the sign area for a monument sign category.** B) Regarding sign C: **Sign C, 28' setback off Campbell, north of Allen Rd, is less than a 30' setback for a pole sign**. **Sign C, at 13.5' tall as measured from the base, exceeds the 12' height for a pole sign.** **Sign C, at120 sq.ft., exceeds the 72 sq.ft. sign area for a pole sign. C) Regarding sign D: **Sign D, 17' setback off Campbell, south of Allen Rd, is less than a 20' setback for a monument sign.** **Sign D, at 70 sq.ft. exceeds the 50 sq.ft. sign area of a monument sign.** D) Regarding sign H: **Sign H, at 13' setback off Allen Rd, is less than a 20' setback for a monument sign.** E) Location & Number of allowed signs - Signs C & D are located along Campbell Avenue, (sufficient frontage) with 5 monument signs located off Allen Road. Per 7A.10.2.C.2.a.2, freestanding signs, all types: One freestanding sign is permitted for each street frontage. One additional freestanding sign on that street frontage for each additional 150 feet of street frontage in excess of the first 300 feet is allowed. For each sign placed on the frontage of a local street (Allen Road in this case), the total allowance number of freestanding signs for the arterial street frontage (Campbell Avenue in this case) shall be reduced by one. **The proposal requires a request to maintain/install 5 signs on the local street front of Allen Road, without reducing any signage off the arterial street (two proposed on Campbell Avenue).** Clarification: the following signs are interior site signs, which may need permits for building code purposes via the sign permit process, but are not subject otherwise to sign criteria for sign type, as they are not seen or meant to be seen from the right of way and are meant for on site users: J, K, L, N,M. } ; {Activity date: 07/17/2018; Status: Continued; Inspector: hTHRALL; Comment: Entered by HTHRALL1 - Resubmittal was received for review towards a Master Sign Program. Contains both freestanding signs and wall signs.} ; {Activity date: 06/18/2018; Status: Correction Required; Inspector: hthrall; Comment: Entered by HTHRALL1 - RE: sign permit review For: 4 wall signs / 10 freestanding signs Site: 3838 N Campbell Avenue, Banner UMC Cancer Center Zoning: PAD-11 Reviewer: Heather Thrall Date: 6/18/18 1) Provide electrical specifications, including shut off switches and timers (per NEC 600 and OLC Ch. 4) 2) Proposed illuminated signage appears to be in compliance with PAD-11 zoning document (no electronic message centers and signs designed to minimize light pollution). PROVIDE NIGHT VIEW OF ALL ILLUMINATED SIGNS IN KEEPING WITH THIS CONDITION OF THE PAD-11 REZONING CASE. 3) On all freestanding signs, per 7A.6.7. setbacks from face of curb to leading edge of sign is required to be dimensioned on a scaled drawing zoom in area if the site plan is not legible at the scale to show the sign. All signage is to be outside sight visibility triangles. Provide this information for each type of sign proposed. The setbacks for pole signs are 30', for monuments they are 20'. See 7A.10.2.C.2 for further details on these types of signs. 4) 7A.4.1.5, for compliance with IBC and inspection information, provide footer details on all sign diagrams in the package. 5) Per 7A.4.5.B, Understood engineering and special inspections will be provided/required for all sign structures exceeding 100 square foot in sign area (except existing structure "Sign B" in the submittal), only should the Master Sign Program request be approved. 6) 7A.4.5.C, engineering and special inspection required for wall signs in excees of 30' off the ground. Understood will be provided should the Master Sign Program request be approved. 7) Sign A - missing mounting details. Check all signs for mounting specifications (i.e. type /size/ number of screws/bolts, etc.) and label. 8) Sign B is an existing sign structure, but the description of work is not a change of copy but a new sign for electrical, mounting and sign area purposes. Provide mounting details for the pan to the masonry, provide top view or side view showing raised letters. The cabinet face is approximately 105 square feet. **This sign exceeds the sign area |