Inspection History Details
Inspection Status: Not ready for Inspection
Inspection History: ELECTRIC - RECONNECT
| Date | Description | Inspector | Results | Comments |
|---|---|---|---|---|
| 07/09/2012 | ELECTRIC - RECONNECT | Not ready for Inspection | IVRS - Inspection :* | |
| 07/09/2012 | ELECTRIC - RECONNECT | Approved | PM RE-INSPECTION...CORRECTIONS MADE | |
| 07/09/2012 | ELECTRIC - RECONNECT | Denied | MISIDENTIFIED CONDUCTORS NEED TO BE RE-PULLED, CANNOT REIDENITFY WITH TAPE. USE LAY-IN LUG FOR BONDING GUTTER AND REMOVE THE #10 WHICH IS DOUBLE LUGGED IN DISCONNECT. USE PROPER FITTING FOR CONNECTING EQUIP. GROUNDING CONDUCTORS. CURRENT SPLIT BOLT IS NOT DESIGNED FOR THIS PURPOSE. |
|
| 07/05/2012 | ELECTRIC - RECONNECT | Denied | IVRS - Inspection : The wiring is not complete or does not comply with code.| 245* |
|
| 07/02/2012 | ELECTRIC - RECONNECT | Denied | IVRS - Inspection : A reinspection fee has been assessed for this inspection. Multiple inspectio |
|
| 06/29/2012 | ELECTRIC - RECONNECT | Denied | IVRS - Inspection : See detailed listing on site.| 999* |
|
| 06/25/2012 | ELECTRIC - RECONNECT | Denied | IVRS - Inspection : See detailed listing on site.| 999* 1) INTERIOR SUBPANEL NOT MADE OF CODE COMPIANT 2) BACK BAR RECEPTERS REMOVED - A PERMIT TO RE INSTALL WILL BE NEEDED 3) BLOWER WIRING REMOVED - BLOWER STILL PRESENT 4) SERVICE STILL NON CODE COMPLIANT #9 5) SURFACE WIRING (OFFICE) STILL NONCODE COMPLIANT #5 |
|
| 06/20/2012 | ELECTRIC - RECONNECT | Denied | IVRS - Inspection : See detailed listing on site.| 999* 1. MAINTAIN WORKING CLEARANCES INTERIOR PANELS 2. CORDS NEED SUPPORT + PHYSICAL PROTECTION (AU) 3. STAGE CORD WIRING NON CODE COMPLAINT 4. OPEN JUNCTION BOXES + MISSING DEVICE PLATES 5. SURFACE MOUNTED ELECTRIC CONDUCTORS IN WIRING NON CODE COMPLAINT 6. EXPOSE CONDUCTORS FOR WIRING 7. BACK BAR RECEPTICALS TO BE GFI PROTECTED 8. WIRING + BLOWER MOTOR INSIDE WALKING BOX NON CODE COMPLAINT 9. NUMOROUS CODE COMPLAINT ITEMS AT SERVICE 10. HAVE QUALIFIED ELECTRICAL PERSON REPAIR + RECALL |