Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Inspection History Details
Inspection Status: Approved
Inspection History: ELECTRIC - CONSTRUCTION POWER
Permit Number - T07CM02676
Inspection Description - ELECTRIC - CONSTRUCTION POWER
Inspection Status - Approved
Date | Description | Inspector | Results | Comments |
---|---|---|---|---|
11/27/2007 | ELECTRIC - CONSTRUCTION POWER | Approved | IVRS - Inspection :* | |
10/23/2007 | ELECTRIC - CONSTRUCTION POWER | Partial Approval | IVRS - Inspection :* 1) CONSTRUCTION TRAILER NOT WIRED AT THIS TIME. RECALL WHEN AND IF CONSTRUCTION TRAILER IS WIRED TO SERVICE |
|
09/26/2007 | ELECTRIC - CONSTRUCTION POWER | Partial Approval | IVRS - Inspection :* 1) CONSTRUCTION TRAILER NOT WIRED AT THIS TIME. RECALL WHEN AND IF CONSTRUCTION TRAILER IS WIRED TO SERVICE |
|
09/24/2007 | ELECTRIC - CONSTRUCTION POWER | Denied | IVRS - Inspection : See detailed listing on site.| 999* 1. CANNOT USE SHEETMETAL SCREW FOR CONNECTION OF GROUNDS - NEC 250.8 2. SEAL OPEN KNOCK OUT IN BOTTOM OF PANEL 3. INSTALL MISSING SCREWS IN DEAD FRONT 4. OK TRENCH/OK TO BACKFILL 5. MARK "SERVICE DISCONNECT" NEC 230.70 |
|
09/20/2007 | ELECTRIC - CONSTRUCTION POWER | Denied | IVRS - Inspection : See detailed listing on site.| 999* 1) SERVICE CONDUCTOR TO BE MIN 24" DEEP NEC 300.5 2) INSTALL PROTECTIVE BUSHING ON WIRES THROUGH NIPPLE INTO DISCONNECT NEC 300.4 (F) 3) INSTALL 2 GROUND RODS MIN 6' APART NEC 250.53 AND 250.56 4) GROUNDS AND NEUTRALS TO BE SEPERATE AFTER MAIN DISCONNECT NEC 250.24 5) VERIFY MAIN BONDING JUMPER INSTALLED AT SERVICE DISCONNECT NEC 250.28 6) MARK SERVICE DISCONNECT NEC 230.70 7) INSTALL ADDRESS LABEL ON SERVICE 8) WIRE UP TRAILER 9) RECALL WHEN READY |