Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO.
If you cannot find what you are looking for please
submit a records request.
Inspection Status: Approved
Inspection History: EXCAVATION/LAYOUT REBAR & ZON
| Date |
Description |
Inspector |
Results |
Comments |
| 05/29/2003 |
EXCAVATION/LAYOUT REBAR & ZON |
|
Approved |
IVRS - Inspection 0000* |
| 11/14/2002 |
EXCAVATION/LAYOUT REBAR & ZON |
|
Not ready for Inspection |
IVRS - Inspection 0000*/ 1) GALLVANIZED 8D'S AT SIDING 6" AND 12" ON CENTER 3) NEED TO CONFIRM TRUSS CONSTRUCTION WITH PLAN INSPECTOR 4) PRE MADE PANELS ON BEARING WALLS ARE THEY ACCEPTABLE 5) CHECK ALL AMPERAGE ON B/BOARD HTR 240 CIRCUIT AT 20 AMP 1ST ONE WAS 8,000 WATTS=8.3 AMPS 6) ROOF NEED TO LEVEL RIDGE INSTALL GUSSETS AT RIDGE AND WALLS AT COLLAR TIES, MAKE SURE WALLS ARE PLUMBING AND IN LINE 7) SERV PANEL #1 ALSO NEED LOAD CALC 8) FIND GAS LINE SERV NOT TO BE UNDER BLDG 9) NEED HEAT SOURCE FOR NEW ROOMS 10) SUB PANEL IN EAST ADDITION NOT WIRED CORRECTLY 11) MOVE COMBUSTIBLES FROM B/BOARD HTRS, NO HEAT IN REAR BEDROOM 12) REMOVE WINDOW BARS AT BEDROOMS AND DOUBLE CYLINDER DEAD BOLT AT DOORS 13) CHECK LOCATE PROPERTY PINS NEED 6' OR VERIFY MINIMUM SETBACK WITH ZONING 14) #1 AL FEEDER AT SERV.=110 AMPS MAXIMUM 2 SUB PANELS OVER LOAD SERV. |