Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO.
If you cannot find what you are looking for please
submit a records request.
Inspection Status: Passed
Inspection History: ENGR Grading Final
| Date |
Description |
Inspector |
Results |
Comments |
| 05/18/2018 |
ENGR Grading Final |
MRUSSO |
Approved |
Entered by DROBERT5 - |
| 02/08/2018 |
ENGR Grading Final |
MRUSSO |
Continued |
Entered by DROBERT5 - 1) CIVIL PLANS SHOW INSTALL OF PRE-FAB METAL BLDGS ON A CONCRETE PAD, NO DETAIL PROVIDED.
2) CONTRACTOR PROVIDED A STRUCTUAL PLAN (TLCP STRUCTUAL ENGINEERING) FOR CONSTRUCTION OF THE BLDG PADS, HOWEVER THERE ARE NO COT STAMPS
3) INSTALLATION INCLUDED WIRE MESH WITH THREE #4 BARS HORIZONTAL ALONG BOTH SIDES OF THE PAD. FOOTINGS OR TOE DOWN IS 18"W BY 16" D.
4) PROVIDE EOR APPROVAL FOR METAL BLDG PAD CONSTRUCTION AND COT APPROVAL FOR RE-ENFORCEMENT INSTALLATION.
5) BULDINGS MAY REQUIRE A SEPARTE BLDG PERMIT. |
| 01/23/2018 |
ENGR Grading Final |
DROBERT5 |
Continued |
Entered by DROBERT5 - THE LANDSCAPERS HAVE TRENCHED FOR THE POLY INSTALLATION ALONG THE EAST AND SOUTH SIDES OF THIS SITE AND WILL BE INSTALLING THE CONTROLER LINES AND PLACING BACKFILL IN THE LOWER PORTION OF THE TRENCHES. ONCE THIS HAS BEEN COMPLETED THEY WILL BE INSTALLING ADDITIONAL PIPES AND SENSOR WIRES AND BACKFILL. I HAVE REMINDED THEM THAT THEY WILL NEED TO ALSO INSTALL THE INDICATOR TAPE WITHIN THE TOP 6 INCHES OF THE TRENCH BACKFILL. |
| 06/22/2018 |
ENGR Grading Final |
RLEDONNE |
Approved |
Entered by RLEDONN1 - |
| 06/22/2018 |
ENGR Grading Final |
RLEDONNE |
Approved |
Entered by RLEDONN1 - |
| 06/22/2018 |
ENGR Grading Final |
RLEDONNE |
Approved |
Entered by RLEDONN1 - |
| 03/28/2018 |
ENGR Grading Final |
MRUSSO |
Continued |
Entered by DROBERT5 - PROGRESS INSPECTION, NO SITE CHANGES OR CONCERNS AT THIS TIME |
| 02/08/2018 |
ENGR Grading Final |
MRUSSO |
Continued |
Entered by DROBERT5 - 1) CIVIL PLANS SHOW INSTALL OF PRE-FAB METAL BLDGS ON A CONCRETE PAD, NO DETAIL PROVIDED.
2) CONTRACTOR PROVIDED A STRUCTUAL PLAN (TLCP STRUCTUAL ENGINEERING) FOR CONSTRUCTION OF THE BLDG PADS, HOWEVER THERE ARE NO COT STAMPS
3) INSTALLATION INCLUDED WIRE MESH WITH THREE #4 BARS HORIZONTAL ALONG BOTH SIDES OF THE PAD. FOOTINGS OR TOE DOWN IS 18"W BY 16" D.
4) PROVIDE EOR APPROVAL FOR METAL BLDG PAD CONSTRUCTION AND COT APPROVAL FOR RE-ENFORCEMENT INSTALLATION.
5) BULDINGS MAY REQUIRE A SEPARTE BLDG PERMIT. |
| 01/23/2018 |
ENGR Grading Final |
DROBERT5 |
Continued |
Entered by DROBERT5 - THE CREWS ARE WORKING ON THE FOLLOWING ITEMS:
1) INSTALLING LANDSCAPING, POLY TUBING
2) INSTALLING CHAIN LINK FENCE ALONG THE PERIMETER.
3) GRADING FOR ADDITIONAL PAVEMENT |