Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

PRO is currently experiencing an outage. Some documents and records may not be available on PRO momentarily. We apologize for the inconvenience and are working to restore full access.

Case: CE-VIO0323-02424

Case Details

Status:

Closed - Resolved

Type:

P.N.I. Property and Building Inspection
Address:

Entered Date:

03/16/2023

Applicant:

N/A

Description:

Completed Inspections

Case Status: Closed - Resolved
Case Number: CE-VIO0323-02424
Case Description: P.N.I. Property and Building Inspection
Total Completed Inspections - 1
End Date Description Inspector Results Comments
04/21/2023 COT - ENFC - Code Enforcement - Initial In Violation Robert Gonzalez (04/21/2023): Ac units not properly installed and sealed; ampacity of the unit needs to be verified to the last approved development plan. Proper sizing of AC unit needs to provide adequate cooling throughout unit. Building has large openings that have been boarded (AC unit removed) Potential weight bearing studs damaged. Contractor must verify if affected studs are bearing walls and appropriate repair needed under applicable permit. Stucco has cracks not providing proper weather protection. Paint is peeling, worn not properly protecting the building. Building’s fascia is deteriorated with signs of wood rot to include the roof eave. Staircase repairs must be completed under a permit that requires a certified welder and welds shall be tested by an independent testing laboratory. Bolts, Anchor bolts, expansion bolts must have proper hardware and must comply with applicable AISC code standards. Stucco finish lacks paint protection. Sliding glass door frame is damaged, wood shows termite decay, stucco has open penetrations. Electrical panels lack of legible labeling for identification purposes.