Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Address Search: 410 W SIMMONS RD

Search

Parcel Attributes

Parcel106050440
JurisdictionTucson, Pima County
City of Tucson ZoningC-2
Tucson WardWard 3
Major Street & Route

Gateway Route

Pima County Data Assessor, Recorder, Treasurer, ...
Parcel Map Map
Parcel Attributes Issue?

Annexations & Original City Zoning (OCZ)

Address: 410 W SIMMONS RD
Date - 08/19/2026 2:09 p.m.
Total Number Of Annexations & Original City Zoning (1)
Plan Description Annexation Ordinance Effective Date OCZ Ordinance
C9-59-19 North To Roger Rd. And East To Kolb Rd. 1895 1957

Permits

Address: 410 W SIMMONS RD
Date - 08/19/2026 2:09 p.m.
Total Number Of Permits - (9)
Permit Status Apply Date Expired Date Unit Type Description
TS-PRM-1023-00562 Issued 10/11/2023 04/08/2024 Sign - Permanent (1) New wall sign
T20CM02757 Complete 05/01/2020 04/26/2023 Commercial Building TI: OFFICE
T20CM00625 Complete 01/28/2020 11/08/2020 Commercial Building DEMO - INTERIOR AND PARTIAL EXTERIOR. Relocate 200 amp service and replace with new.
T03PL01470 FINAL 09/09/2003 03/30/2004 PLUMB REPLACE:WATER HEATER (APA)
T15EX02099 EXPIRED 07/09/2015 05/24/2015 EXCAV 200' TRENCH TO ABANDON PIPE (PAVEMENT) REPLACES PERMIT U2015000531
T15EX03032 FINAL 10/15/2015 12/14/2015 EXCAV 5' X 5' BELLHOLE TO DIG AND INSPECT GAS MAIN IN DIRT ACROSS THE STREET FROM WORK ADDRESS
T15TC02392 FINAL 10/15/2015 N/A BARRICAD 5' X 5' BELLHOLE TO DIG AND INSPECT GAS MAIN IN DIRT ACROSS THE STREET FROM WORK ADDRESS
T18CM07802 FINAL 10/02/2018 04/07/2019 COMBO ELECTRICAL RECONNECT
T21RW00402 FINAL 01/26/2021 04/02/2021 ROW Change from aerial to underground work: From the TEP Pole SW corner of 410 W Simmons Rd, riser and begin 90 trench/bore, placing 2-2''conduit and 625' coax cable heading Southwest to out of ROW Simmons Rd is under a pavement cut moratorium until September 18, 2023 and additional pavement repairs must be performed if the pavement is cut. A 2" mill and inlay, with PAG #2 (406 Asphaltic Concrete replacement specification, dated 12/18/19) will be required for the entire width of the impacted lanes and extend 50' on each side of the trench.