Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Activity Search: TC-RES-0524-02702
Activity
Parcel Attributes
| Parcel | 10612016A |
|---|---|
| Jurisdiction | Tucson |
| City of Tucson Zoning | C-2, R-1 |
| Water Course | Washes |
| Tucson Ward | Ward 3 |
| Tucson Registered Neighborhood | Flowing Wells |
| Major Streets & Routes | Arterial or Collector ,Intersection Buffer |
| Pima County Data | Assessor, Recorder, Treasurer, ... |
| Parcel Map | Map |
| Address |
Permits
Date - 11/21/2024 9:57 p.m.
Number Of Permits - (1)
| Permit | Status | Apply Date | Expired Date | Unit | Type | Description |
|---|---|---|---|---|---|---|
| TC-RES-0524-02702 | Needs Resubmittal | 05/03/2024 | 10/30/2024 | UNIT 16 | Residential Building - One or Two Family | I will be building a loft shed with the dimensions of 12' feet wide by 27' feet long and the height of 15'.7" feet using 4x6 by 27' long lines as a base, one on each side and one in the center., using 19' feet long by 15'.7" feet height by 12' feet wide for the loft space. There will be 3 doors in total, one at the entrance of the loft, one at the entrance of the restroom and one at the entrance of the storage room. There is also going to be a total of 2 windows, one We will be using the 8' feet wide and 12' feet long by 10'.7" in height, left to use it as a storage. I will also be making a full bathroom; shower, sink, and toilet with the measurements of 5' feet wide by 8' feet long and the height of 10'.7". For the bathroom I will use pipes of 3" inches and 2" inches. There will be an electric circuit which will be connected to the electric panel box. I will be using double 2x4 wooden bars every 2' feet and I will be installing siding to the exterior wall and I will use 2"x4"x12' wide by 14' feet long to build the loft and I will use 5' feet of space to build the steps of the 19' feet that are mentioned at the beginning and I will be installing CDX plywood in the exterior walls, I will also be making an electric circuit. I will use insulation R13. I will be using 2"x6"x16' on the roof, and I will be installing insulation R19 inside the 2x6's. On the roof top I will install peel and stick base and peel and stick granulated, using drip edge 2x2. I will also be installing one skylight which measures 2' feet wide by 4' feet long. |