Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Review Detail

Permit Number: T99CM05582
Parcel: 136260430

Review Status: Stopped

Review Details: COMMERCIAL TI

Permit Number - T99CM05582
Review Name: COMMERCIAL TI
Review Status: Stopped
Review Date Reviewer's Name Type of Review Description Status Comments
09/22/2000 CRAIG GROSS ZONING REVIEW Passed
09/29/2000 RANDY SCHULER ELECTRICAL-COMMERCIAL REVIEW Denied CITY OF TUCSON DEVELOPMENT SERVICES
ELECTRICAL REVIEW COMMENTS

DATE: September 28, 2000
ACTIVITY NUMBER: T99CM05582
PROJECT NAME: Park Lighting
PROJECT ADDRESS: 3250 S. Jessica Av.
PROJECT REVIEWER: Randy Schuler, P.E.
E1 and E6
1) Provide a # 6 equipment ground from both poles C1 and C2 all the way back to the service. In addition the taps from the #6 equipment ground to all the other poles must be a minimum of a #8. See 99NEC 250-122
E1
1) Pole B1 lacks the number of conductors required to serve 7 lights.
2) Please provide the alpha/numeric designation along with the number of fixtures served adjacent to each pole. This will simplify the plan review, inspection and installation of the project.
E6
1) Remove the ground from the service lateral. If left in it will provide a parallel path for the normal current to flow. In addition the utility will not land it in the transformer.
2) Both the lighting and power loads in the load calculation appear to be incorrect. Please carefully review all the loads and revise as necessary.
E7
1) Revise the panel schedule to reflect the fixture VA as opposed to lamp wattage. See 99NEC 220-4(b)
GENERAL COMMENT
1) Please return the plans I have already reviewed along with your next submission. Please note I cannot begin my second review without the original set for comparison purposes.
10/16/2000 DOUG LAAKSO BUILDING-COMMERCIAL REVIEW Denied 1.PROVIDE STRUCTURAL CALCULATIONS AND DRAWINGS FOR LIGHT POLES, BY AN ARIZONA REGISTERED STRUCTURAL ENGINEER. 2. PROVIDE STRUCTURAL CALCULATIONS AND DRAWINGS FOR MOUNTING HARDWARE AND CROSSARMS , BY AN ARIZONA REGISTERED STRUCTURAL ENGINEER. 3. PROVIDE SITE PLAN DIMENSIONALLY LOCATING LIGHT POLES FROM ADJACENT PROPERTY LINES , BY AN ARIZONA REGISTERED ARCHITECT OR ENGINEER. 4. PROVIDE CHECK OF PERMISSIBLE STRESSES IN PLAIN CONCRETE PER UBC SEC 1923.7.

Final Status

Task End Date Reviewer's Name Type of Review Description
02/22/2001 BALDERET APPROVAL SHELF Stop
09/22/2000 ANY OUT TO CUSTOMER Stopped
09/22/2000 ANY REJECT SHELF Stopped