Permit Review Detail
Review Status: Completed
Review Details: RESIDENTIAL - BLDG/ZONING/ENGINE/NPPO
Permit Number - T22CM02690
Review Name: RESIDENTIAL - BLDG/ZONING/ENGINE/NPPO
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 04/19/2022 | STEVE SHIELDS | ZONING | REVIEW | Reqs Change | ZONING REVIEW TRANSMITTAL FROM: PDSD Zoning Review PROJECT: T22CM02690 3380 S Fritz Pl - R-1 Attached Workshop (1st Review) TRANSMITTAL: April 19, 2022 This site is located in the R-1 zone (UDC 5.10.3). A single-family residence (SFR) is a permitted use in this zone (Table 4.8-2). See Use-Specific Standards 4.9.7.B.5 - 9. 1. The lot coverage calculation does not appear to be correct. Per UDC Article 6.4.3.C.1.a Roofed areas, open on at least one side, which provide shelter to exterior areas, such as balconies, entrances, stoops, and terraces, porches, are not included in the lot coverage. Also the two (2) existing sheds shown on the plan should be included in the lot coverage. 2. The two (2) existing sheds shown on the plot plan appear on aerial photos some time after 2010. Zoning was not able to find required/approved compliance reviews for these sheds. Either provide the approved documents or include them in this permit. As the sheds do not meet the minimum perimeter yard setback of 6’-0” or 2/3 the height of the exterior wall height a neighbor’s setback waive must be secured. To secure this neighbor setback waiver the following statement must be provided on the plot plan and be signed and dated by the adjacent property owner(s): My Name is____________________ and I am the owner of the property located at_______________________. I have reviewed the site plan and I have no objection to structure being located or constructed________ feet from the property line as depicted on the site plan. Signature: _____________________________ Date: _________________________________ If you are unable to secure the required setback waiver, as setback dimensions were not provided and it appears that the sheds are at a 0’-0” setback a Board of Adjustment maybe required. 3. Provide the exterior wall heights for the two (2) sheds. If you have any questions about this transmittal, please contact Zone1.desk@tucsonaz.gov. |
| 04/19/2022 | SSHIELD1 | ENGINEERING | REVIEW | Passed | |
| 04/19/2022 | SSHIELD1 | NPPO | REVIEW | Passed | |
| 04/26/2022 | KEN VAN KARSEN | BUILDING-RESIDENTIAL | REVIEW | Reqs Change | Show any wall openings (doors or windows) in the existing wall (keynote #8 sheet S-3). Show the ridge beam connection to the existing block wall. Show any electrical alterations. |