Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Completed
Review Details: WALLS - ZONING/ENGINE
Permit Number - T22BU00152
Review Name: WALLS - ZONING/ENGINE
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 05/10/2022 | ERIC NEWCOMB | BUILDING-COMMERCIAL | REVIEW | Approved | |
| 05/31/2022 | SAMUEL ROGERS | ZONING | REVIEW | Reqs Change | FROM: Samuel Rogers PDSD Zoning Review Section PROJECT: T22BU00152 Add gates and fencing to East Courtyard space (1st Review) 40 E CONGRESS ST TRANSMITTAL DATE: 05/31/2022 DUE DATE: 05/18/2022 COMMENTS: Please resubmit revised drawings and any redlined plans along with a detailed response letter, which states how all Zoning Review Section comments were addressed. 01. COMMENT: The proposed fence and gate are shown on an issued Development Package DP (DP26-0202). DP26-0202 indicates that the "OWNER/ARCHITECT TO PROVIDE DETAILS AND FINISHES" for the wall. This site is in the Infill Incentive District (IID) so this BU permit must go through IID review prior to this permits Issuance (https://www.tucsonaz.gov/files/integrated-planning/Special_Districts_Application_Revised_5-23-22_fillable.pdf). I recommend reaching out to Maria Gayosso maria.gayosso@tucsonaz.gov or by phone at 520-837-6972 for more information. 02. COMMENT: The maximum height of a wall or fence within a perimeter yard shall be six feet; however, the wall or fence may be higher than six feet, but no higher than ten feet, if at least 75% of the area above six feet in height is left unobstructed and open through the use of architectural elements, such as arches, columns, or wrought iron If you have any questions about this transmittal, Contact Samuel Rogers at Samuel.Rogers@tucsonaz.gov RESUBMITTAL OF THE FOLLOWING IS REQUIRED: Revised Building Plans |
| 05/31/2022 | SSHIELD1 | ENGINEERING | REVIEW | Passed |