Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Completed
Review Details: COMMERCIAL - BLDG/FIRE/ZONING/ENG
Permit Number - T21CM09479
Review Name: COMMERCIAL - BLDG/FIRE/ZONING/ENG
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 01/03/2022 | ERIC NEWCOMB | BUILDING-COMMERCIAL | REVIEW | Reqs Change | 1. Sheet L-2; Site Plan: Per the City of Tucson and IBC requirements, fabric structures with 700 SF or less must be placed a minimum of 10'-0" from other structures. Fabric structures greater than 700 SF shall be required to meet the separation requirements of the IBC Table 602 and Section 705.3. Please revise the new shade structure separation from the existing structures to meet that criteria. |
| 01/04/2022 | SSHIELD1 | COMMERCIAL IMPACT FEE | COMMERCIAL IMPACT FEE PROCESSING | Passed | |
| 01/04/2022 | SSHIELD1 | ENGINEERING | REVIEW | Passed | |
| 01/04/2022 | STEVE SHIELDS | ZONING | REVIEW | Reqs Change | ZONING REVIEW TRANSMITTAL FROM: PDSD Zoning Review PROJECT: T21CM09479 4880 E 29TH St – R-3 New Shade Structure (1st Review) TRANSMITTAL: January 4, 2022 This site is located in the R-3 zone (UDC 4.7.12). Multi-Family is an allowed use in the zone (UDC Table 4.8-2) subject to Use Specific Standard 4.9.7.B.6 1. Per UDC 3.3.3.G.2.c as you are adding a structure to a site a site plan, development package (DP), meeting the checklist for Minor Changes to a Commercial/Industrial Site is required to be submitted and approved prior to approve of this permit. The checklist can be found at: https://www.tucsonaz.gov/files/pdsd/forms/Minor_Changes_to_Commercial_Industrial_Sites_.pdf. The DP is separate submittal from the building permit and is submitted at: https://docs.tucsonaz.gov/Forms/tucsonpermitapp, using Submission Type “Site Review”. 2. Per UDC Article 6.6.3.C Within Residential Zones accessory structures shall not exceed 12 feet in height, unless attached to a principal structure. Per UDC Article 6.4.4.A Measurement of Building Height: Building height is the vertical distance measured from the design grade elevation to the highest point of a flat roof; to the deck line of a mansard roof; or to the middle (between the eave and ridge ) of the highest gable of a pitched or hipped roof. That all said the propose shade structure exceeds the allowed height of an accessory structure in the R-3 Zone. A Board of Adjustment for Variance is required for the shade structure as drawn. Board of Adjustment application/requirements can be found at: https://www.tucsonaz.gov/files/pdsd/codes/Zoning_Administration_Application_BA_fillable.pdf. The Board of Adjustment is a separate submittal from this building plan and is submitted at: https://www.tucsonaz.gov/pdsd-filedrop, using the Submission Type “Zoning Administration”. Contact of the Board of Adjustment is Mark Castro at Mark.Castro@tucsonaz.gov. If you have any questions about this transmittal, please contact Elisa Hamblin at Elisa.Hamblin@tucsonaz.gov. |
| 01/05/2022 | JVINCEN1 | FIRE | REVIEW | Approved |
Final Status
| Task End Date | Reviewer's Name | Type of Review | Description |
|---|---|---|---|
| 01/05/2022 | VVERA1 | OUT TO CUSTOMER | Completed |