Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: T21CM07949
Parcel: 136346040

Address:
3220 S AMES PL

Review Status: Completed

Review Details: RESUBMITTAL

Permit Number - T21CM07949
Review Name: RESUBMITTAL
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
11/16/2021 KEN VAN KARSEN BUILDING-RESIDENTIAL REVIEW Reqs Change Please address the Zoning comments.

Provide the manufacturer’s calculations, data and sealed Arizona engineered plans for the pre-designed assembly, R106.1. This documentation is available from the manufacturer on request.
11/18/2021 STEVE SHIELDS ZONING REVIEW Reqs Change FROM: Samuel Rogers
PDSD Zoning Review Section

PROJECT: T21CM07949
New Garage (2nd Review)
3220 S AMES PL

TRANSMITTAL DATE: November 18, 2021

DUE DATE: November 23, 2021

COMMENTS: Please resubmit revised drawings and any redlined plans along with a detailed response letter, which states how all Zoning Review Section comments were addressed.

1. This comment was not addressed. COMMENT: The provided site plan is missing some required information (setbacks, lot coverage calculation, adjacent zoning, north arrow, etc.) For full site/plot plan requirements see: https://www.tucsonaz.gov/files/pdsd/forms/Residential_Plot_Plan_Requirements.pdf.

2. This comment was not addressed. COMMENT: Provide an elevation drawing showing the height of the proposed structure measured from design grade to the highest point of a flat roof; to the deck line of a mansard roof; or to the middle (between the eave and ridge) of the highest gable of a pitched or hipped roof. (You can use the image provided on the 1st page of plans as your elevation drawing and add/draw the heights)

3. This comment was not addressed. COMMENT: Detached accessory structures may not exceed 12' in height.

4. This comment was not addressed. COMMENT: The setback requirement is based on the height of the adjacent wall (6' or 2/3 the height of the wall), provide the wall height so required setbacks can be determined.

5. This comment was not addressed. COMMENT: The total gross floor area (GFA) of the accessory structure may not exceed 25% the GFA of the principle structure.

If you have any questions about this transmittal, Contact Samuel Rogers at Samuel.Rogers@tucsonaz.gov

RESUBMITTAL OF THE FOLLOWING IS REQUIRED: Revised Building Plans