Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: T21CM04006
Parcel: 11702335A

Address:
1001 N 9TH AV

Review Status: Completed

Review Details: RESIDENTIAL - BLDG/ZONING/ENGINE/NPPO

Permit Number - T21CM04006
Review Name: RESIDENTIAL - BLDG/ZONING/ENGINE/NPPO
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
06/01/2021 STEVE SHIELDS ZONING REVIEW Reqs Change ZONING REVIEW TRANSMITTAL

FROM: PDSD Zoning Review


PROJECT:
T21CM04006
1001 N 9th Ave
Porch Addition

TRANSMITTAL: June 1, 2021
COMMENTS: the following comments are relative to an application for a Design Development Option (DDO) (UDC 3.11.1).

This site is located in the R-2 zone (UDC 4.7.9). A single-family residence (SFR) is a permitted use in this zone (Table 4.8-2). See Use-Specific Standards 4.9.7.B.5 - 9.

1. Remove the 5’-0” SETBACK LINE from the plan as it is incorrect. Provide perimeter yard setback dimensions from the posts supporting the awning to the east, west and south property lines.

2. The minimum setback to the west property line is the greater of six (6) feet, or two-thirds (2/3) the height of the structure’s wall facing each interior property line (Table 6.3-2.A).

3. The following are the applicable street perimeter yard setback requirements. One of the streets must meet the front street setback and the other the side:
The minimum setback to the front street perimeter property line is the greater of twenty (20) feet, or one and one-half (1 ½) the height of the proposed wall ((UDC 6.4.5.C.1.a).
The minimum setback to a side street property line is ten (10) feet (UDC Section 6.4.5.C.1.b).


If you have any questions about this transmittal, please contact Elisa Hamblin at Elisa.Hamblin@tucsonaz.gov.
06/01/2021 SSHIELD1 NPPO REVIEW Passed
06/09/2021 KEN VAN KARSEN BUILDING-RESIDENTIAL REVIEW Reqs Change Provide a registrant seal on the plan set.

Remove the "Authorized for Construction" and T21CM01777 reference stamps from the Engineer Design Report
06/10/2021 SBLOOD1 ENGINEERING REVIEW Approved