Permit Review Detail
Review Status: Completed
Review Details: COMMERCIAL - TI
Permit Number - T20CM05069
Review Name: COMMERCIAL - TI
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 08/06/2020 | NICHOLAS ROSS | ZONING | REVIEW | Approved | |
| 08/06/2020 | DTRAMME1 | ENGINEERING | REVIEW | Passed | |
| 08/06/2020 | ERIC NEWCOMB | BUILDING-COMMERCIAL | REVIEW | Reqs Change | 1. General: Per the IBC Section 107.1, construction documents shall be prepared by a registered design professional. Please provide. 2. General: Per the IBC Section 107.2, the construction documents shall be in accordance with this Section. Please verify. 3. General: A Code Analysis must be provided on the drawings, indicating Occupancy Classification, Construction Type, Building Square Footage, Occupant Load, Plumbing Fixture Calculations, Egress and Exiting Requirements, all Applicable Codes, Automatic Sprinkler System Requirements, Accessibility Requirements, etc. 4. General: Please provide a project valuation (labor + materials). 5. General: Please provide written responses to all review comments. |
| 08/06/2020 | ERIC NEWCOMB | COMMERCIAL IMPACT FEE | COMMERCIAL IMPACT FEE PROCESSING | Passed | |
| 08/07/2020 | ROBERT SHERRY | MECHANICAL-COMMERCIAL | REVIEW | Reqs Change | 1. Provide plans sealed by an Arizona Registrant. Reference: Arizona Revised Statutes 32-125, Board of Technical Registration Rules R4-30-304. 2. Provide calculations to verify that adequate ventilation will be provided for the occupied spaces. Reference: Section 403.3.1.1, IMC 2018. 3. Verify that the mechanical design does not utilize the corridor as a return air duct. Reference: Section 601.2, IMC 2018. |
| 08/07/2020 | ROBERT SHERRY | PLUMBING-COMMERCIAL | REVIEW | Reqs Change | 1. Provide plans sealed by an Arizona Registrant. Reference: Arizona Revised Statutes 32-125, Board of Technical Registration Rules R4-30-304. 2. Show the location of the source of hot water for the new sinks. Reference: Section 107.2.1, IBC 2018. 3. Provide third-party listing and material standards for all plumbing fixtures being installed. Reference: Sections 303.4 and 402, IPC 2018 4. Show that each trap and trapped fixture has been vented in accordance with one of the methods shown in the IPC. Reference: Section 901.2.1, IPC 2018 |
| 08/07/2020 | ROBERT SHERRY | WATER | REVIEW | Completed | |
| 08/18/2020 | JGARCIA1 | ELECTRICAL-COMMERCIAL | REVIEW | Reqs Change | 1. Provide plans sealed by an Arizona Registrant. Reference: Arizona Revised Statutes 32-125, Board of Technical Registration Rules R4-30-304. |
| 08/19/2020 | JPEELDA1 | FIRE | REVIEW | Approved |
Final Status
| Task End Date | Reviewer's Name | Type of Review | Description |
|---|---|---|---|
| 08/26/2020 | JGARCIA1 | APPROVAL SHELF | Completed |
| 08/26/2020 | JGARCIA1 | OUT TO CUSTOMER | Completed |
| 08/26/2020 | JGARCIA1 | REJECT SHELF | Completed |