Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Permit Number: T20CM04819
Parcel: 136234450

Review Status: Active

Review Details: RESIDENTIAL - BLDG/ZONING/ENGINE/NPPO

Permit Number - T20CM04819
Review Name: RESIDENTIAL - BLDG/ZONING/ENGINE/NPPO
Review Status: Active
Review Date Reviewer's Name Type of Review Description Status Comments
07/28/2020 ANDREW CONNOR NPPO REVIEW Passed
07/29/2020 SSHIELD1 ENGINEERING REVIEW Passed
07/29/2020 STEVE SHIELDS ZONING REVIEW Reqs Change PDSD TRANSMITTAL

FROM: Steve Shields
Section Manager

PROJECT: T20CM04819
3620 S Anchorage Ave
Detached Metal Carport
Residential (1st Review)

TRANSMITTAL DATE: July 29, 2020

The plans have been reviewed by Zoning Review Section but cannot approve the plan until all zoning comments or concerns have been addressed.

This site is located in the R-1 zone (UDC 4.7.1). A single-family residence (SFR) is a permitted use in this zone (Table 4.8-2). See Use-Specific Standards 4.9.7.B.5 - 9. 10.

1. Provide a plot plan that meets the following requirements https://www.tucsonaz.gov/files/pdsd/forms/Residential_Plot_Plan_Requirements.pdf

2. Per Uniform Development Code (UDC) Article 6.6.3.B Detached accessory buildings, carports, are not permitted in the buildable area extending the full width of the lot between the principal building and the front street lot line.

3. Per Uniform Development Code (UDC) Article 6.6.3.C Accessory structures shall not exceed 12 feet in height, unless attached to a principal structure.

Once comment 1 is addressed additional comments maybe forth coming.

If you have any questions about this transmittal, please contact me at Steve.Shields@tucsonaz.gov or (520) 837-4956
07/30/2020 KEN VAN KARSEN BUILDING-RESIDENTIAL REVIEW Reqs Change PROVIDE A COMPLETED SIT PLAN WITH SIDE SETBACKS.
A STRUCTURE PLACED WITHIN THE 3 FOOT FIRE SEPARATION DISTANCE TO PROPERTY LINE REQUIRES ONE HOUR FIRE RATED MATERIALS. UPDATE PLANS WITH SEPARATION OR DETAIL THE RATED MATERIALS WITH AN ENGINEER STAMP.