Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Review Detail

Permit Number: T20CM03300
Parcel: 141185940

Review Status: Completed

Review Details: RESUBMITTAL

Permit Number - T20CM03300
Review Name: RESUBMITTAL
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
08/20/2020 ROBERT SHERRY PLUMBING-COMMERCIAL REVIEW Completed
08/20/2020 ROBERT SHERRY WATER REVIEW Completed
08/20/2020 ROBERT SHERRY MECHANICAL-COMMERCIAL REVIEW Completed
08/27/2020 DAN SANTA CRUZ ELECTRICAL-COMMERCIAL REVIEW Approved
09/01/2020 ERIC NEWCOMB BUILDING-COMMERCIAL REVIEW Reqs Change I have included the comments from the previous review. Of the 19 comments, number 17 was the only one that was provided (architect's date on seal).
1. Sheet T1.1; Occupancy (Plumbing); Occupancy (Exiting): The Plumbing Occupancy indicates 22 persons in the 1620 SF, while the Exiting Occupancy indicates 39 persons in the 1620 SF. Please clarify.
2. Sheet T1.1; Exiting Plan: The north exit indicates 3 occupants and the south exit indicates 34 occupants for a total of 37 occupants. The Exiting Occupancy is indicated as 39. Please coordinate.
3. Sheet T1.1; Building Codes: Please add the 2009 ICC/ANSI A117.1 Accessibility Code.
4. Sheet T1.1; Tactile Exit Signage: The first note references 5/A9.2 for signage design and mounting requirements. Please revise that reference.
5. Sheet T1.1; Tactile Exit Signage: The second note references 9/A9.2 for accessible signage mounting/clearance requirements. Please revise that reference.
6. Sheet T1.1; Tactile Exit Signage: The third note references 10/A9.2 for tactile egress signage mounting requirements. Please revise that reference.
7. Sheet A1.0; Site Keynotes: Note SP-12 was not located on the plan. Please verify.
8. Sheet A2.1; Wall Legend: The first note references 4/A8.4 for typical wall types. Please revise that reference.
9. Sheet A2.1; Symbols: The first symbol references Sheet A7.4 for window type information. Please revise that reference.
10. Sheet A2.1; Symbols: The second symbol references Sheet A7.3 for door information. Please revise that reference.
11. Sheet A2.1; Symbols: The fourth symbol references Sheets A14.1 and A14.2 for turning radius information. Please revise that reference.
12. Sheet A2.1; Floor Plan Keynotes: Note FP-07 references 1/A9.2 for disabled access signage. Please revise that reference.
13. Sheet A2.1; Floor Plan Keynotes: Please complete Note FP-08.
14. Sheet A2.1; Floor Plan Keynotes: Note FP-11 references 5/A9.2 for tactile exit signs. Please revise that reference.
15. Sheet A6.1; Restroom Elevations 105A and 106C: Please indicate the vertical grab bar per the ICC/ANSI Figure 604.5.1.
16. Sheet A9.1; Detail 3: Please indicate the vertical grab bar per the ICC/ANSI Figure 604.5.1, including dimensions.
17. General: The professional seal of the registered architect must include the date the seal was signed. Please provide (all applicable sheets).
18. General: The professional seal of the registered civil engineer indicates the expiration date rather than the date the seal was signed. Please provide (all applicable sheets).
19. General: Please provide written responses to all review comments.

Final Status

Task End Date Reviewer's Name Type of Review Description
09/07/2020 PC_TGUTHEI1 REJECT SHELF Passed
09/07/2020 PC_TGUTHEI1 APPROVAL SHELF Passed
09/07/2020 PC_TGUTHEI1 OUT TO CUSTOMER Completed