Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: T19CM08684
Parcel: 138072080

Address:
801 W MILTON ST

Review Status: Completed

Review Details: RESIDENTIAL - BLDG/ZONING-WALKTHRU

Permit Number - T19CM08684
Review Name: RESIDENTIAL - BLDG/ZONING-WALKTHRU
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
03/03/2021 LBOWERS1 BUILDING-RESIDENTIAL REVIEW Needs Review
11/22/2019 SARAH MEGGISON ZONING REVIEW Reqs Change ZONING REVIEW TRANSMITTAL

FROM: Sarah Meggison, AICP
Planner

PROJECT:
T19CM08684
801 W Milton Street
Addition, Kitchen, Bathroom, Laundry Room

TRANSMITTAL: November 22, 2019
COMMENTS: the following comments are relative to an application for a Design Development Option (DDO) (UDC 3.11.1).

This site is located in the R-1 zone (UDC 4.7.1). A single-family residence (SFR) is a permitted use in this zone (Table 4.8-2). See Use-Specific Standards 4.9.7.B.5 - 9. 10.

The minimum setback is the greater of six (6) feet, or two-thirds (2/3) the height of the structure's wall facing each interior property line (Table 6.3-2.A).

The minimum setback to the front street perimeter property line is the greater of twenty (20) feet, or one and one-half (1 ½) the height of the proposed wall ((UDC 6.4.5.C.1.a).

The applicant is proposing 1-foot setback to the front property line, the required setback is 20-feet.

The applicant is proposing a 1-foot setback to the side interior property line to the west and the required setback would be 10-feet 9-inches based off a wall height of 16-feet 2-inches.

The applicant is proposing a 2-foot 4-inch setback to the side interior property line from the storage on the accessory structure and 1-foot on the porch of the accessory structure, the required setback is 7-feet 7-inches based off of an 11-foot 4-inch wall height.

The applicant is proposing a 4-foot setback to the rear property line. The required setback is 7-feet, 7-inches based off of an 11-foot 4-inch wall height.

A DDO is required.
11/22/2019 SMEGGIS1 ENGINEERING REVIEW Passed
11/22/2019 SMEGGIS1 NPPO REVIEW Passed