Permit Review Detail
Review Status: Completed
Review Details: BILLBOARD - BLDG30days
Permit Number - T19BU00160
Review Name: BILLBOARD - BLDG30days
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 08/09/2019 | GLENN MOYER | ADMINISTRATIVE | ADMIN REVIEW | Denied | Below are comments on the authorized repair resubmittal for COT ID# 434 at 3505 East Grant Road (T19BU00160 R).. Sheet 1 of 3 None Sheet 2 of 3 1. In revised 3rd paragraph of Scope of Work, add face panel depth, consistent with 6th paragraph of Scope of Work. 2.. In 4th & 5th paragraphs of Scope of Work, the existing and replacement spacers are specified to have a one-inch depth where this face panel configuration may use a two-inch depth spacer; clarify if existing is two-inch depth (or two one-inch depth spacers stacked) or not and revise as necessary. 3. In Partial Site Plan, revise title to Partial Vicinity Map. Sheet 3 of 3 1. In revised Poster Panel Side View, delete two orphan designations and associated leader lines indicating obsolete panel clips to be removed and not reinstalled and show leader lines from added panel clip designations to all stringers they are attached to. 2. In revised Poster Panel Side View, the 24 panel clips shown to be removed and reinstalled on each face does not conform to the 48 panel clips indicated to be removed and reinstalled on each face in the 3rd & 6th paragraphs of Scope of Work on Sheet 2; resolve this conflict. 3. In Top Stringer Mounting Detail, Poster Panel Side View & Detail “A” of Poster Panel Side View, existing and replacement spacers are specified with one-inch depth; revise to two-inch depth if applicable (see Comment #2 for Sheet 2) 4. Added Light Arm Mounting Detail (Top View) is a second side view rather than a top view; correct the title and add an actual top view to detail. 5. In revised Face Panel Attachment, the panel clip is referred to as a “Tiffin clip”; either revise to “panel clip” or, if this is the recognized name for this style of panel clip, revise “panel clip” to “Tiffin clip” in the balance of the plan. |
Final Status
| Task End Date | Reviewer's Name | Type of Review | Description |
|---|---|---|---|
| 09/10/2019 | AMARTIN1 | OUT TO CUSTOMER | Completed |