Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Permit Number: T17BU00062
Parcel: 99999999B

Address:
9701 E I10

Review Status: Completed

Review Details: BILLBOARD - BLDG30days

Permit Number - T17BU00062
Review Name: BILLBOARD - BLDG30days
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
02/21/2017 ERIC NEWCOMB BUILDING-COMMERCIAL REVIEW Approved
03/14/2017 GLENN MOYER ADMINISTRATIVE ADMIN REVIEW Reqs Change Below are the BRC comments on the authorized repair submittal for COT ID# 594 at 9701 East Interstate 10 (T17BU00062).

Sheet 1 of 2
No comments.

Sheet 2 of 2
1. In 1st sentence in boxed note above Scope of Work, add “of the Stipulation”.

2. Add two paragraphs to reflect removal and reinstallation or other disposition of light fixtures and light fixture support arms, indicating point of disconnect and clarifying whether or not light support arm mounting brackets are to be removed and reinstalled or remain in place (see T10EL01793 for reference; also see T10EL01262 for pending T17BU00049 and T10EL01795 for pending T17BU00055).

3. In 3rd & 6th paragraphs, revise stringer lengths to reflect shorter bottom stringer.

4. In 4th and/or 5th paragraph of Scope of Work, reference lower backrail and clarify whether it is to remain in place or be replaced.

5. In the 7th & 8th paragraphs, specify that the plywood panels apron sections are to be attached to the wood stringers and the on centers for the 16d nail attachments.

6. Add note replicating Billboard Note #11 on Sheet 1.

7. In East Sign Face Elevation and Side View add depiction of lower backrail (in a fashion similar to that for upper backrail) and indicate its disposition.

8. In East Sign Face Elevation and Side View, depict light fixtures.

9. Add light fixture support arm mounting details.

FIN.

Final Status

Task End Date Reviewer's Name Type of Review Description
04/07/2017 MMENDIB1 OUT TO CUSTOMER Completed