Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Completed
Review Details: COMMERCIAL - TI
Permit Number - T16CM08867
Review Name: COMMERCIAL - TI
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 11/28/2016 | STEVE SHIELDS | ZONING | REVIEW | Reqs Change | PDSD TRANSMITTAL FROM: Steve Shields Lead Planner PROJECT: Sunwest Federal Credit Union T16CM08867 Building Plan (3rd Review) TRANSMITTAL DATE: November 28, 2016 1. The building plans have been reviewed by Zoning Review Section but cannot approve the plan until all zoning comments or concerns have been addressed. 2. The mounting height for the van accessible sign is not correct and should be shown as 7'-0" to finish grade from the bottom of the sign. 3. Until the above comments have been addressed and all other PDSD review agencies have approved the building plans zoning cannot approve. If you have any questions about this transmittal, please contact me at Steve.Shields@tucsonaz.gov or (520) 837-4956 |
| 11/28/2016 | ROBERT SHERRY | MECHANICAL-COMMERCIAL | REVIEW | Reqs Change | Provide a thermostat for AC-1 that complies with the provisions of Section C403,2,4.IECC 2012. Reference: Section C101.4.3, IECC 2012. |
| 11/28/2016 | DAN SANTA CRUZ | ELECTRICAL-COMMERCIAL | REVIEW | Approved | |
| 11/28/2016 | PAUL BAUGHMAN | ENGINEERING | REVIEW | Approved | |
| 11/28/2016 | ERIC NEWCOMB | BUILDING-COMMERCIAL | REVIEW | Reqs Change | 1. SHEET A1.0; LIFE SAFETY PLAN: PER THE IBC SECTION 1016.3, EXIT ACCESS TRAVEL DISTANCES MUST BE INDICATED ON HORIZONTAL AND VERTICAL PATHS. PLEASE REVISE ON THE PLAN. 2. SHEET A2.0; WALL TYPES: WALL TYPE W1 SIMILAR INDICATES A 6'-0" TALL WALL (PER DETAIL 3/A2.0), WHILE DETAIL 3/A2.0 AND DETAIL 4/A2.0 INDICATE A DEFFERENT WALL HEIGHT. PLEASE COORDINATE. 3. SHEET A2.0; KEYNOTE 10: PLEASE INCLUDE A SPECIFICATION ON THE DRAWINGS FOR THE STRUCTURAL GLASS (GLASS AND SUPPORT SYSTEM ABLE TO RESIST HORIZONTAL LOADS AS INDICATED IN THE IBC SECTION 1607.14). 4. SHEETS A3.0 AND A4.0: PLEASE REVISE THE SHEET NUMBER IN THE TITLE BLOCK. 5. SHEET A4.0: PLEASE INDICATE A DETAIL NUMBER FOR THE TYPICAL MOUNTING HEIGHTS. 6. SHEET A4.0; ELEVATION 6: PLEASE REVISE THE HEIGHT OF THE HORIZONTAL GRAB BAR FROM 2'-10" TO 33"-36". 7. GENERAL: PLEASE PROVIDE WRITTEN RESPONSES TO ALL REVIEW COMMENTS. |
| 11/28/2016 | ROBERT SHERRY | WATER | REVIEW | Completed | |
| 11/28/2016 | ROBERT SHERRY | PLUMBING-COMMERCIAL | REVIEW | Completed | |
| 11/28/2016 | MARTIN BROWN | FIRE | REVIEW | Approved | |
| 11/28/2016 | ERIC NEWCOMB | COMMERCIAL IMPACT FEE | COMMERCIAL IMPACT FEE PROCESSING | Passed |