Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Completed
Review Details: BILLBOARD - BLDG30days
Permit Number - T14BU00861
Review Name: BILLBOARD - BLDG30days
Review Status: Completed
Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
---|---|---|---|---|---|
08/06/2014 | LEERAY HANLY | BUILDING-COMMERCIAL | REVIEW | Needs Review | |
08/22/2014 | GLENN MOYER | ADMINISTRATIVE | ADMIN REVIEW | Denied | BRC Comments Below are comments for the electrical repair submittal for COT ID# 203 at 1431 South Alvernon Way (T14BU00861). Sheet 1 of 3 1. Please provide documentation that the utility pole shown to be located on private land and to be removed is owned by the electric utility and reference to any associated easement. Sheet 2 of 3 1. In Existing and New Electrical Riser Diagrams, the sixth paragraph of Scope of Work, and the Description of New Ballast, the proposed replacement ballasts do not match a fluorescent lamp with the lumen output of the current lamp. Specify replacement ballasts that match a lamp with lumen output that does not exceed that of the existing lamp. 2. In Existing and New Electrical Riser Diagrams and the eight paragraph of Scope of Work, the twelve (12) #18 replacement wires are not like in number to the existing six (6). Assure that the number of #18 wires match the appropriate ballast selected as per Comment #1 above. 3. In the seventh paragraph of Scope of Work and Description of Replacement Lamp, the proposed replacement lamps are not like as to single pin configuration and lumen output, the latter of which is shown to be greatly increased. Specify the same replacement lamp or one with a lumen output that does not exceed that of the existing lamp. Sheet 3 of 3 1. The timer model specified (boxed) in the manufacturer's literature sheet does not either match neither the one specified on Sheet 2 nor the existing single circuit configuration. Conform the timer indicated on Sheet 3 to the one specified on Sheet 2 (ET8015CR). 2. In North Face Sign Elevation, specify the appropriate ballast as per comments on Sheet 2 of 3. |
Final Status
Task End Date | Reviewer's Name | Type of Review | Description |
---|---|---|---|
09/02/2014 | CPIERCE1 | REJECT SHELF | Completed |