Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: T12BU00412
Parcel: 134081530

Review Status: Completed

Review Details: WALLS

Permit Number - T12BU00412
Review Name: WALLS
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
05/31/2012 STEVE SHIELDS ZONING REVIEW Denied DSD Zoning Review Transmittal

TO: Planning and Development Services Department
Plans Coordination Office

FROM: Steve Shields
Lead Planner

PROJECT: T12BU00412
8402 E. Beverly Street

TRANSMITTAL DATE: March 29, 2012

COMMENTS:
Site Plan OK D.D.O. required for: site fence within the required perimeter yard exceeding the allowed six (6) feet height.

Per LUC Section 3.2.5.2.H The maximum height of a wall or fence within a perimeter yard is six (6) feet; however, the wall or fence may be higher than six (6) feet, but no higher than ten (10) feet, if: (See Illustration 3.2.5.2.H.)
1. At least seventy-five (75) percent of the area above six (6) feet in height is left unobstructed and open through the use of architectural elements, such as arches, columns, or wrought iron, or
2. Part of, or located on top of, a retaining wall no higher than ten (10) feet measured from design grade and no higher than six (6) feet measured from the top of the retaining portion of the wall, or
3. A greater height is required through the rezoning process or the Special Exception Land Use process,
or
4. A greater height is required by a specific regulation in the LUC.

3.2.6.4, R-1 Zone, Development Designator "G", Perimeter Yard Indicator "AA" the required perimeter yard setback is 6'-0" or 2/3 the height of the exterior wall. Perimeter yard setback from the proposed wall/fence to the east side perimeter yard property line is based on a wall height of 9'-0", required setback is 6'-0", proposed setback is 0'-0.
3.2.6.4, R-1 Zone, Development Designator "G", Perimeter Yard Indicator "AA" the required perimeter yard setback is 6'-0" or 2/3 the height of the exterior wall. Perimeter yard setback from the proposed wall/fence to the south side perimeter yard property line is based on a wall height of 9'-0", required setback is 6'-0", proposed setback is 0'-0.
If you have any questions about this transmittal, please contact me at Steve.Shields@tucsonaz.gov or (520) 837-4956
07/26/2012 FRODRIG2 ENGINEERING REVIEW Needs Review
07/26/2012 FRODRIG2 NPPO REVIEW Needs Review
07/26/2012 FRODRIG2 BUILDING-RESIDENTIAL REVIEW Needs Review