Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

PRO is currently experiencing an outage. Some documents and records may not be available on PRO momentarily. We apologize for the inconvenience and are working to restore full access.

Permit Review Detail

Permit Number: T11CM03682
Parcel: 10309068D

Review Status: Completed

Review Details: COMMERCIAL - TI

Permit Number - T11CM03682
Review Name: COMMERCIAL - TI
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
12/06/2011 RONALD BROWN BUILDING-COMMERCIAL REVIEW Denied Need to provide mop sink as required by Table 2902.1.
12/06/2011 ROBERT SHERRY WATER REVIEW Approved
12/06/2011 ROBERT SHERRY PLUMBING-COMMERCIAL REVIEW Denied Provide the minimum plumbing facilities (e.g. a service sink) required by Table 2902.1 and Section 2902.2, IBC 2006, for mercantile and storage occupancies. See also, Section 1109.5.1, IBC 2006.
12/06/2011 RAY MAJUTA ELECTRICAL-COMMERCIAL REVIEW Denied T11CM03682
3745 N I10 EB Frontage rd

1. Item # 2 last review was not addressed, the TEP Construction Book indicates that the Fault Current for the 800 amp Service can have a fault Current of 55,660 AIC, the sevice must bring this value down to a level the electrical equipment can safely handle. NEC 2005 Section 110.9 and 110.22 require the Fault Current meet adaquate levels.


Ray Majuta
Elect Pln CK
PDSD, C of Tuc,
12/6/11
Ray.majuta@tucsonaz.gov
12/06/2011 ROBERT SHERRY MECHANICAL-COMMERCIAL REVIEW Denied Provide the supporting documentation for the roof construction, as noted in footnote b of section 3 of the submitted COMcheck Envelope Compliance Certificate. [Original comment: Provide energy code compliance calculations for the building envelope and the mechanical systems. Use the climate zone for Pima County < 4,000 feet. Provide sufficient detail on the drawings to evaluate the energy compliance of the building envelope. The information shall, as a minimum, include U-factors of the envelope systems and fenestration components, along with the R-values of the insulation and the SHGC for the fenestration. Reference: Sections 101.4 and 104.2, International Energy Conservation Code 2006.]
12/09/2011 CPIERCE1 ENGINEERING REVIEW Needs Review
12/09/2011 CPIERCE1 WWM REVIEW Needs Review