Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

PRO is currently experiencing an outage. Some documents and records may not be available on PRO momentarily. We apologize for the inconvenience and are working to restore full access.

Permit Review Detail

Permit Number: T10EL00752
Parcel: 99999999B

Address:
2433 E 22ND ST

Review Status: Completed

Review Details: BILLBOARD-BLDG/ELEC10days

Permit Number - T10EL00752
Review Name: BILLBOARD-BLDG/ELEC10days
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
04/07/2010 ERIC NEWCOMB BUILDING-COMMERCIAL REVIEW Approved
04/12/2010 RAY MAJUTA ELECTRICAL-COMMERCIAL REVIEW Approved
05/03/2010 GLENN MOYER ADMINISTRATIVE ADMIN REVIEW Denied Please find below comments on the lighting relocation & electrical repair
submittal for COT ID# 73 at 2433 East 22nd Street (T10EL00752).

Mark Mayer
Billboard Review Committee
3361 East 23rd Street
Tucson, Arizona 85713
520.326.4522

Sheet 1 of 3

1. Billboard Notes (#3): correct the APN#.
2. Billboard Notes (#4): opening line should be amended to read "Latitude
and Longitude of billboard at approximate center of footprint:" (also
deleting line at bottom).
3. Billboard Notes (#5): change "Faces" to "faces".
4. Billboard Notes (#11): delete comma after "relocated".
5. Billboard Notes (#13): delete this note (not applicable for removal of
metal halide and replacement with top-mounted fluorescent).
6. Title Block: change title to "Lighting Relocation and Electrical Repair
Site Plan".

Sheet 2 of 3

1. Title Block: add "COT Activity No. T10EL00752" (do not add quotation
marks).
2. Title Block: change title to "Lighting Relocation and Electrical Repair
Plan" (do not add quotation marks).
3. Partial Vicinity Map, Electrical Riser Diagram & Note (Bullet #5):
explain why existing weatherhead, meter socket box, meter, and disconnect
are missing and provide supporting documentation.
4. Electrical Riser Diagram: provide a standard configuration relative to
the I-beam where the entire service is being replaced on twin-beam poster
panels (with or without backing panel; able to include second ballast for
double-faced billboard; add top view if appropriate; see comments for
T10EL00530/COT ID# 439).
5. Panel Block: delete entry for spare circuit.

Sheet 3 of 3

1. Title Block: add "COT Activity No. T10EL00752" (do not add quotation
marks).
2. Title Block: change title to "Lighting Relocation and Electrical Repair
Plan" (do not add quotation marks).
3. Description of Ballast: indicate ballast as "Existing" or otherwise as
applicable.

Final Status

Task End Date Reviewer's Name Type of Review Description
05/14/2010 CPIERCE1 OUT TO CUSTOMER Completed
05/14/2010 SUE REEVES REJECT SHELF Completed