Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Permit Number: T10CM01251
Parcel: 11706315E

Address:
450 S TOOLE AV

Review Status: Completed

Review Details: SITE

Permit Number - T10CM01251
Review Name: SITE
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
05/17/2010 DAVE MANN FIRE REVIEW Approved
05/17/2010 RBROWN1 ADA REVIEW Passed
05/21/2010 LOREN MAKUS ENGINEERING REVIEW Denied Provide paved vehicle use area for access to the equipment site.
05/21/2010 STEVE SHIELDS ZONING REVIEW Denied PDSD TRANSMITTAL

FROM: Steve Shields
Lead Planner

PROJECT: ViaSat
T10CM01251
Site Plan (1st Review)

TRANSMITTAL DATE: May 21, 2010

COMMENTS: Please resubmit revised drawings and a response letter, which states how all Zoning Review Section comments regarding the Land Use Code and Development Standards were addressed.

1. This site plan was reviewed for compliance with the City of Tucson Development Standards (D.S.) and Land Use Code (LUC) for full code compliance.

2. D.S. 2-02.2.1.A.5 Provide the lot dimensions and bearings on sheet Z-1.

3. D.S. 2-02.2.1.A.6 For all existing and proposed buildings and structures, provide the size, height, overhangs, canopies, and use on sheet Z-1.

4. D.S. 2-02.2.1.A.12 Per LUC Section 3.3.7.3 Surfacing Requirements. All vehicular use areas shall be surfaced with one (1) of the following materials.
A. Asphaltic concrete.
B. Cement concrete.
C. A penetration treatment of bituminous material and seal coat of bituminous binder and mineral aggregate.
That said indicate on the plan how this is provided.

5. D.S. 2-02.2.1.A.20 Provide the recordation information, Docket and Page, for all existing and proposed easements on site.

6. D.S. 2-02.2.1.A.28 Provide the existing zoning of parcel and adjacent parcels, including those across streets and alleys.

7. D.S. 2-02.2.1.A.31 Provide the existing and proposed use based on uses listed in the LUC. The proposed use should be listed as "Communications "34", subject to: Sec. 3.5.4.20.A"

8. D.S. 2-02.2.2.A Provide the following calculations on either sheet T-1 or Z-1:
1. D.S. 2-02.2.2.A.1 Gross lot area
2. D.S. 2-02.2.2.A.2 Floor area for each building on site, existing and proposed.
3. D.S. 2-02.2.2.A.3 Provide a Floor Area Ratio (FAR) calculation that includes the allowed FAR and proposed FAR on the plan see LUC Section 3.2.11
4. D.S. 2-02.2.2.A.3 Provide a calculation that shows how the requirements of LUC Section 3.5.4.20.A, the buildings do not occupy more than thirty (30) percent of the site, are met
5. D.S. 2-02.2.2.A.6 Provide a building area and vehicle use area expansion calculation on the plan.

9. Depending on how the above comments are addressed addition comments may be forth coming.
If you have any questions about this transmittal, please contact me at Steve.Shields@tucsonaz.gov or (520) 837-4956.

C:\planning\site\t10cm01251

RESUBMITTAL OF THE FOLLOWING IS REQUIRED: Revised site plan and additional requested documents.
05/21/2010 LOREN MAKUS ENGINEERING REVIEW Denied DATE: June 21, 2010
SUBJECT: 450 S Toole Ave- Site Plan Engineering Review
TO: Metro Permits
LOCATION: T14S R13E Sec13 Ward 5
REVIEWERS: Jason Green, CFM
ACTIVITY: T10CM01251 (Site/Building Plan), T10CM01551 (Building Plan) and T10BU00924 (Building Plan)

SUMMARY: Engineering Division of Planning & Development Services Department has received and reviewed the revised Site and Building Plans for the above referenced property. Engineering Division does not recommend approval of the Site/Building Plan applications at this time. The following items need to be addressed:

SITE PLAN COMMENTS:

1) DS 2-02.2.1.A.12: It has been determined by the Zoning Administrator that the requirements of LUC Section 3.3.7.3 for surfacing requirements does not need to be meet for the proposed driveway. However construction details must be provided on the plans for the construction of the 20-foot access road. Provide the following in plan view and/or details:

a. Provide a detail for the transition from existing asphalt to proposed gravel driveway to prevent damage to the existing asphalt driveway. Label and dimension any cut off walls or other erosion control for the transition.

b. Provide a cross section through the proposed driveway labeling thickness, gravel size, erosion control abatement if applicable, etc.

c. Provide a note on the plan set to state; "All damage to existing asphalt due to construction will be repaired prior to final inspection of the site.

2) Provide the Docket and Page information for all existing easements as shown on site. All new easements will require Docket and Page information prior to final inspection of the site.

GENERAL COMMENTS:

Please provide a revised plan set that addresses the comments provided above. Include a comprehensive response letter and any supplemental information addressing in detail responses to all of the above comments. Enclose "redlines" with the resubmittal package.

Further comments may be generated upon resubmittal of the plan review.

For questions or to schedule an appointment I can be reached at 837-4929.

Jason Green, CFM
Senior Engineer Associate
Engineering Division
Planning & Development Services Department
05/25/2010 ANDREW CONNOR LANDSCAPE REVIEW Approved
05/26/2010 ANDREW CONNOR NPPO REVIEW Approved
06/14/2010 ROBERT SHERRY PLUMBING-COMMERCIAL REVIEW Approved
06/14/2010 RONALD BROWN ZONING HC REVIEW Approved

Final Status

Task End Date Reviewer's Name Type of Review Description
07/12/2010 GERARDO BONILLA OUT TO CUSTOMER Completed
07/12/2010 SUE REEVES REJECT SHELF Completed