Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Completed
Review Details: RESIDENTIAL BLDG/WWM
Permit Number - T10CM00422
Review Name: RESIDENTIAL BLDG/WWM
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 04/30/2010 | GERRY KOZIOL | WWM | REVIEW | Approved | |
| 05/11/2010 | MICHAEL ST. PAUL | ZONING | REVIEW | Approved | |
| 05/21/2010 | RONALD BROWN | BUILDING-RESIDENTIAL | REVIEW | Denied | 1. All three structures may not be on one single permit. Please come down and pull a second permit for the remodel of the Out Building and the New Car Cover. Permit number T10CM00422 shall be for the addition to the main house. FOUNDATION PLANS: 2. Please note grade away from foundations shall fall min 6” within the first 10’, R401.3. 3. All exterior framed walls require continuous concrete footings min. 12" wide x 12" below grade with treated sill plates and anchor bolts per R319.1 & R403.1.6 (including carport and porch enclosures). SECTIONS - DETAILS: 4. Sill plates that rest on concrete are required to be decay-resistant, R319.1(2). 5. 6" separation of untreated posts or columns above finished grade and 1” above concrete, R319.1.4. 6. Specify wall and ceiling covering Note: Ceiling gypsum board must be 1/2" sag resistant when applied to ceilings framed at 24" o/c, IRC table R702.3.5 footnote d. OUTDOOR LIGHTING CODE: 7. Provide cut sheets for all FCO fixtures showing the angle of cutoff, light emissions and fixture wattage. All other fixtures are assumed to be unshielded (non-FCO style). INTERNATIONAL ENERGY CONSERVATION CODE: 8. Specify the "R" value of the insulation, as well as the "U" factor and the solar heat gain coefficient of the windows and doors. Tucson is in climate zone 2B. The simplified prescribed energy values for glazing and skylights is U=0.75, ceiling R=30 and walls R=13. Mass wall requirement is R=4 when 50% of insulation is exterior and R=6 when applied interior, N1102.1. 9. Provide a note requiring the insulation certificate shall be posted in the electrical distribution panel before final inspection, N1101.8. END OF REVIEW |
Final Status
| Task End Date | Reviewer's Name | Type of Review | Description |
|---|---|---|---|
| 05/25/2010 | SUE REEVES | OUT TO CUSTOMER | Completed |
| 05/25/2010 | SUE REEVES | REJECT SHELF | Completed |