Permit Review Detail
Review Status: Completed
Review Details: RESUBMITTAL - SITE ALL
Permit Number - T08CM00702
Review Name: RESUBMITTAL - SITE ALL
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 01/11/2010 | BIANCA RAMIREZ | ENGINEERING | REVIEW | Denied | DATE: January 11, 2010 SUBJECT: Site Plan TO: Troy Williams LOCATION: 175 W Plata Street, T14S, R13E, Section 1, Ward 3 REVIEWERS: Bianca Ramirez, CFM ACTIVITY: T08CM00702 (Second Review) RESUBMITTAL REQUIRED: Site Plan SUMMARY: Engineering Division of Development Services Department has received and reviewed the proposed site plan for the above referenced property. Engineering Division does not recommend approval of the site plan at this time. Please address the following review comments prior to the next submittal. Please include a response letter to the comments along with the corrected copies of the Site Plan. Site Plan: 1. Complied A. D.S. 2-02.2.1.4. Revise location map to cover approximately one (1) square mile and draw at a minimum scale of 3" = 1mile, and provide the following information: 1. Complied 2. Complied 3. Identify and label section corners within location map. 2. Please label lot bearings on site plan per D.S. 2-02.2.1.5 3. Complied 4. Label all applicable existing and future sight visibility triangles per D.S. 2-02.2.1.10. Response: Delete "Pedestrian" from labeled of SVT's and provide SVT at the intersection of Plata and 10th Ave. 5. Complied 6. Comment removed. 7. Complied 8. Complied 9. Complied 10. Please list estimated cut & fill quantities per D.S. 2-02.2.1.17. Based on topo it appears that at a minimum there will be some cut. Provide within cut/fill quantities. 11. Complied 12. D.S. Sec.2-02.2.1.17: As part of the site submittal requirement estimated cut and fill quantities are required to be indicated on the plans. Verify that cut/fill quantities are representative of what is taking place on site. 13. Please show dimensioned existing and future right-of-way and label per D.S. 2-02.2.1.19. 14. Complied 15. Standard Note: Verify that all easement of record have been graphically shown on the plan together with recording docket and page per D.S. 2-02.2.1.20. 16. Dimension from street monument lines to existing and proposed curbs, sidewalks, driveways, and utility lines per D.S. 2-02.2.1.21. Note: Revise labeled right of ways to read "existing" and clearly indicate 1/2 ROW for Plata. 17. Please provide existing topographic contours at intervals not exceeding two (2) feet and/or spot elevations as pertinent and Bench Mark based on City of Tucson Datum, including City Field Book and page number per D.S. 2-02.2.1.23. Provide contour interval on plan. Note: Provide additional spot elevations, specifically in areas that contractor and/or those constructing parking lot can locate. In addition, provide contour interval on site plan or identify with next submittal. 18. Standard Note: Verify that all fences, walls, or vegetation for screening and sight visibility are identified by type, material, height, location and spacing per D.S. 2-02.2.1.27. 19. Verify that the refuse container detail is in accordance with the included Solid Waste Detail. Specifically ensure that the inside dimensions are indicated per D.S. 2-02.2.1.32 and D.S. 6-01.0. Note: Provide approval letter from Environmental Services for approval of dumpster location. 20. DS Sec.2-02.2.1.A.32: Label and show the maneuverability for refuse vehicles in plan view at the proposed refuse container location. Current location of trash area will need to be approved by Environmental Services, Andy Vera. Provide email or letter from Andy Vera approval of location. 21. Clarify is approach to trash enclosure labeled 2" black top is to include 4" A.C. for refuse vehicle. Current 2" back top cannot be approved. Note: Acknowledge 4 " concrete is proposed. Verify with Environmental Services that 4' concrete is acceptable. Standard of 5" is required per trash enclosure detail. 22. Get approval for gate from Environmental Services, access to refuse container appears to be of concern. Note: Provide email or approval letter from Environmental Services. 23. Standard Note: Be advised that a permit or a private improvement agreement will be necessary for any work performed within the Right-of-way. Contact Permits and Codes at (520) 791-5100 for permit information. 24. Please show a typical cross section of the P.A.A.L. or call out the percentage of slopes. Call out the GB at the D/W, if applicable. Note: Additional grade elevations will be acceptable. 25. List contact name and phone number for the owner on the plans. 26. Complied 27. Complied 28. Complied 29. See plans for spelling errors. Please correct with next submittal. Recommend labeling pedestrian areas as maximum 2% slope, only a suggestion. 30. Additional comments may be forthcoming. If you have any questions, I can be reached at 837-4928 or Bianca.Ramirez@tucsonaz.gov Bianca C. Ramirez Engineering Associate City of Tucson/Development Services Department 201 N. Stone Avenue P.O. Box 27210 Tucson, Arizona 85726-7210 (520) 837-4928 office (520) 879-8010 fax |
| 01/12/2010 | TERRY STEVENS | ZONING | REVIEW | Denied | DSD TRANSMITTAL FROM: Terry Stevens Lead Planner PROJECT: T08CM00702 175 W. Plata St. Site Plan - Commercial Storage TRANSMITTAL DATE: 01/12/10 COMMENTS: Please resubmit revised drawings along with redlines and a response letter, which states how all Zoning Review Section comments regarding the Land Use Code and Development Standards were addressed. 1. .DS 2-02.2.1.5 Provide the distance and bearings of all property lines. 2. DS 2-02.2.1.6 Provide dimensions for the footprints of all structures. A "Family Dwelling" use is allowed in the I-1 zone as a secondary use and only as a caretaker use for the principal use. See LUC Sec. 2.7.2.4.A and subject to Sec. 3.5.7.7. Review and revise plans. Parking spaces are required to be included in the parking calculations as well as the secondary use is to be listed with the uses. Provide on the footprint of all structures the height of all proposed structures. 3. DS 2-02.2.1.4 A small, project-location map shall be drawn on the first sheet of the development plan, preferably in the upper right corner. The map should cover approximately one (1) square mile, be drawn at a minimum scale of 3" = 1 mile, and provide the following information. 1. section corners will be labeled. 4. DS 2-02.2.1.8 Clearly indicate the location of the wheel stop curbing with dimension. Minimum 2'-6" from front of parking space to the front of the wheel stop curb. Clearly indicate the correct number of required parking spaces in the calculations. The caretakers quarters will require 2 parking spaces. 5. DS 2-02.2.1.9 Provide in the calculations the number of required and provide bicycle parking spaces. See LUC Sec. 3.3.4 and DS 2-09 for requirements. Please provide a dimensioned detail class 2 bicycle parking spaces and a detail of the type of rack proposed. Be aware that that development standard 2-09 has been revised. Please provide a plan view detail of the proposed class 2 bicycle parking spaces. Single rack spaces placed in a row will allow a minimum of seventy -two (72) inch length per bicycle parking space and a minimum of thirty (30) inches between outer spaces of racks. A five (5) foot wide access aisle measured from the front or rear of the seventy-two (72) inch long parking space will be provided beside each row. Lighting will be provided such that all facilities are thoroughly illuminated and visible from adjacent sidewalks, parking lots, or buildings, during working hours. The surface of the facility can be surfaced the same as for motor vehicle parking or with a minimum of one (1) inch thickness of one-fourth (1/4) inch aggregate material. Please review the revised DS 2-09 and provide the necessary corrections to the bicycle parking as required. Once changes are provided and reviewed further comments may result. The revised DS may be found on the web at: http://www.tucsonaz.gov/dsd/Codes___Ordinances/DevStd209.pdf 6. DS 2-02.2.1.14 Provide in the calculations the number of required and provided loading zones including required size. Per LUC Sec. 3.4.5.2 , one 12X55 loading zone is required. 7. DS 2-02.2.1.31 Provide the proposed use as follows: Commercial Storage "34", subject to: Sec. 3.5.10.1 and Family Dwelling , Secondary Land Use subject to: Sec. 3.5.7.7. 8. DS 2-02.2.2.3 Provide the allowed and proposed Floor Area Ratio (FAR) in the calculation portion of this site plan. If you have any questions about this transmittal, please call Terry Stevens, (520) 837-4961 C:\planning\cdrc\DSD\T08CM00702-2.doc RESUBMITTAL OF THE FOLLOWING IS REQUIRED: Revised site plan and additional requested documents |
| 01/13/2010 | ANDREW CONNOR | NPPO | REVIEW | Approved | |
| 01/13/2010 | ANDREW CONNOR | LANDSCAPE | REVIEW | Denied | The site plan and landscape plan must show identical site layout to avoid conflict between the two plans. Ensure that all changes to the site plan are reflected on the landscape plan. Additional comments may apply. |
| 02/01/2010 | RICK MYERS | PLUMBING-COMMERCIAL | REVIEW | Denied | 1. Items not addressed. Revise the site drawing to include the following information: a. The location of the main water lines and fire hydrants. b. The location and size of the public sanitary sewer, and c. The location, invert, and rim elevation of the upstream and down stream manholes. |