Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: T06CM01709
Parcel: 110073160

Review Status: Completed

Review Details: RESUBMITTAL

Permit Number - T06CM01709
Review Name: RESUBMITTAL
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
04/16/2007 JASON GREEN ENGINEERING REVIEW Approved DATE: April 16, 2007
SUBJECT: 4137 E Flower St- Manufactured Home Set-up
TO: Suzette Martinez
LOCATION: T13S R14E Sec34, Ward 3
REVIEWERS: Jason Green, CFM
ACTIVITY: T07CM01709 (Site Plan) and T07OT00641 (Floodplain Use Permit)


SUMMARY: Engineering Division of Development Services Department has received and reviewed the site plan (T06CM01709) and Floodplain Use Permit (T07OT00641) for the above referenced property and recommends approval of the site plan and Floodplain Use Permit at this time.

The subject property is entirely located within a FEMA Shaded Zone X 100-year floodplain as shown on the Flood Insurance Rate Map (FIRM), Community- Panel No. 040073-04019C-1644K, effective date February 8, 1999.

Placement of manufactured homes located in the floodplain must be elevated such that the bottom of the structural frame or the lowest point of any attached appliances, whichever is lower, is above the regulatory flood elevation (one foot higher than the calculated water surface elevation of the base flood). The manufactured home must be securely anchored. Certification by a state-registered professional civil engineer that the installation of the manufactured home meets all the requirements of Section 26-9 of the Ordinance is required. Certification of elevation must be prepared by a state registered land surveyor.

For purposes of this permit the following flood elevations shall be used:
Base Flood Elevation (BFE) = 1.0 feet above highest adjacent natural grade
Regulatory Flood Elevation (RFE) = 2.0 feet above highest adjacent natural grade

Bottom of the structural frame of the manufactured home and lowest point of any attached appliances to be at or above the Regulatory Flood Elevation (RFE).

Please be advised that since the subject property is located within the Shaded Zone X 100-year floodplain, it will be required that an elevation certificate for the proposed manufactured home set-up be filled out by an Arizona Registered Land Surveyor showing that the bottom of the structural frame or the lowest point of any attached appliances, whichever is lower, is above the regulatory flood elevation (one foot higher than the calculated water surface elevation of the base flood), and returned to our office.


If you have any questions, I can be reached at 791-5550, extension 1189.



Jason Green, CFM
Senior Engineer Associate
Engineering Division
Development Services
04/16/2007 GERRY KOZIOL WWM REVIEW Approved

Final Status

Task End Date Reviewer's Name Type of Review Description
04/16/2007 DELMA ROBEY APPROVAL SHELF Completed
04/16/2007 DELMA ROBEY OUT TO CUSTOMER Completed
04/16/2007 DELMA ROBEY REJECT SHELF Completed