Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you cannot find what you are looking for please submit a records request.

Permit Number: T06CM01010
Parcel: 113050070

Review Status: Completed

Review Details: RESUBMITTAL

Permit Number - T06CM01010
Review Name: RESUBMITTAL
Review Status: Completed
Review Date Reviewer's Name Type of Review Description Status Comments
03/29/2006 PATRICIA GILBERT ENGINEERING REVIEW Denied DATE: March 29, 2006
ACTIVITY NUMBER: T06OT00486 / T06CM01010
PROJECT NAME: Carlos Portillo Residence
PROJECT ADDRESS: 3518 North Jackson Avenue
PROJECT REVIEWER: Patricia Gilbert

FLOODPLAIN USE PERMIT IS DENIED

RESUBMITTAL REQUIRED: SITE PLAN, DRAINAGE REPORT, FLOODPLAIN USE PERMIT APPLICATION


1. Sign the floodplain use permit application, the signature line is located in the back of the application. The applicant or the applicant's authorized representative can sign the application.

2. When comparing the contours indicated on the site plan to the contours shown on the Department of Transportation (TDOT) Map site, there is 2' difference between the contours indicated on the Site Plan and the TDOT Map site. If the contours shown on the site plan are correct there is a differential grading issue. When a plan shows fill in excess of two feet from above existing grade at any location in the outer one hundred feet of the developing site adjacent to residentially zoned property require the procedure outlined in Development Standard 11-01.801.A.. This process must be complete prior to Grading Plan approval. It is highly recommended to check for accuracy of the contours shown on the site plan. Revise the site plan if necessary.

3. Be advised once construction is complete, a condition of this permit contains a requirement that the applicant, or the applicant's authorized representative, complete a FEMA Elevation Certificate and is returned to the Development Services Department (DSD) Engineering Division prior to approval of final inspection. The original elevation certificate must be returned to the DSD Engineering Division.