Permit Review Detail
Review Status: Completed
Review Details: SITE
Permit Number - T05CM04031
Review Name: SITE
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 08/04/2005 | JIM EGAN | FIRE | REVIEW | Denied | Indicate fire rating and opening protection requirements for west exterior wall. |
| 08/08/2005 | ANDREW CONNOR | LANDSCAPE | REVIEW | Passed | |
| 08/09/2005 | ANDREW CONNOR | NPPO | REVIEW | Passed | |
| 08/19/2005 | PATRICIA GILBERT | ENGINEERING | REVIEW | Approved | |
| 09/08/2005 | DAN CASTRO | ZONING | REVIEW | Denied | COMMENTS: Please resubmit revised drawings along with redlines and a response letter, which states how all Zoning Review Section comments regarding the Land Use Code and Development Standards were addressed. 1. The accessible parking detail provided does not show how a disabled person will get from the access aisle to the sidewalk. Indicate on the plan if access aisle is flush with sidewalk or if a ramp is needed provide a detail of the accessible ramp. See ICC/ANSI A117.1-2003 Section 405 for ramp specifications. (D.S. 2-02.2.1.A.8) 2. Revise general note five (5). The correct development designator is "31". (D.S. 2-02.2.1.A.31) 3. Revise general note eight (8). The words "Lot Coverage" shall be changed to "Floor Area Ratio". Also, add the maximum allowed FAR (.90) and the proposed FAR (.11). (D.S. 2-02.2.2.A.3) 4. Revise general note nine (9). The correct maximum allowed building height is 40 feet. 5. Review of this plan by the Zoning Review Section may be done over the counter. Please contact Dan Castro to set an appointment. If you have any questions about this transmittal, please call Dan Castro, (520) 791-5608 ext. 1180. An appointment is required to discuss these comments in person. |
| 09/09/2005 | DAN CASTRO | ZONING HC SITE | REVIEW | Denied | See Zoning Review comments. |
Final Status
| Task End Date | Reviewer's Name | Type of Review | Description |
|---|---|---|---|
| 09/12/2005 | KMEDINA1 | OUT TO CUSTOMER | Completed |