Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Completed
Review Details: OTHER
Permit Number - T01CM06132
Review Name: OTHER
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 02/21/2002 | RANDY SCHULER | ELECTRICAL-COMMERCIAL | REVIEW | Approved | Third Review 1) Panel A should be designated as Panel SP to match the circuitry on the plan. 2) The compressor load must be take from the motor tables in 99NEC 430 per 99NEC 430-6. This would increase each phase load to 2100 VA . 3) Clarify the purpose of the receptacle connected to circuit MP-10,12. This represents my 3rd request for this information. 4) Provide a circuit and receptacle on the plan for circuit MP 4,6 (Mig Welder). 5) The exit lights must be connected to the unswitched side of the lighting circuit serving the area. See 99 NEC 700-12(e). 6) The #8 equipment ground described on the one-line diagram must be increased to a minimum of #6. See 99NEC 250-122 7) Provide the fuse type and size in the service disconnect. I would recommend an UL Class RK1. 8) Provide the conduit sizes on the one-line service diagram. 9) The B phase of the service must be utilized as the high leg per 99NEC 384-3(f). This will require relocating the breaker serving panel SP. 10) Fixtures A and D must be incandescent in order to comply with our light pollution code. Please clarify. 11) Provide the service entrance riser size and conductor sizes for the one-line service diagram. The customer provides the riser and conductors and the utility provice the service drop conductors. |
Final Status
| Task End Date | Reviewer's Name | Type of Review | Description |
|---|---|---|---|
| 02/22/2002 | MVALDEZ1 | OUT TO CUSTOMER | Completed |