Permit Review Detail
Review Status: Completed
Review Details: COMMERCIAL NEW
Permit Number - T01CM00827
Review Name: COMMERCIAL NEW
Review Status: Completed
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 06/05/2001 | JIM EGAN | FIRE | REVIEW | Denied | FIRE SPRINKLERS REQUIRED. |
| 06/05/2001 | TOM CLARK | WATER | REVIEW | Passed | |
| 06/18/2001 | DOUG WILLIAMS | FLOODPLAIN | REVIEW | Denied | |
| 07/13/2001 | RANDY SCHULER | ELECTRICAL-COMMERCIAL | REVIEW | Denied | E-1 1) Please clarify what the existing building (housing the new saw) is used for? What type of saw is it and what will it be used for? E-2 1) Provide the starter size for the E.C's. It appears it should be a size 0 minimum. 2) There is an 80% difference between phase A and phase C on panel N. Thus the high phase current must be used in the panel and load analysis. 3) Provide fault current at service POA. Provide fault current analysis for panels T and A. 4) Provide a WP/GFCI receptacle on the roof within 25' of E.C.'s. 99NEC 210-8, and 210-63 5) There is a receptacle on the exterior of the building without a circuit number. E-3 1) Please provide a fixture cut for fixture B. 2) The IECC will only allow .6 watts/ft2. In addition you must provide dual switching which will approximate a uniform 50% reduction of the lighting load. See IECC 705. |
| 07/16/2001 | BOB SUBA | PLUMBING-COMMERCIAL | REVIEW | Approved | |
| 07/16/2001 | BOB SUBA | MECHANICAL-COMMERCIAL | REVIEW | Approved | |
| 07/18/2001 | PHIL SEADER | BUILDING-COMMERCIAL | REVIEW | Denied | |
| 07/23/2001 | MICHAEL ST. PAUL | ZONING | REVIEW | Denied | |
| 07/23/2001 | GERRY KOZIOL | WWM | REVIEW | Passed |
Final Status
| Task End Date | Reviewer's Name | Type of Review | Description |
|---|---|---|---|
| 08/09/2001 | SUE REEVES | OUT TO CUSTOMER | Completed |