Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.

Plan Number: S04-032
Parcel: Unknown

Review Status: Stopped

Review Details: REVISN TENT PLAT & CORE RESUB

Plan Number - S04-032
Review Name: REVISN TENT PLAT & CORE RESUB
Review Status: Stopped
Review Date Reviewer's Name Type of Review Description Status Comments
03/05/2008 FERNE RODRIGUEZ START PLANS SUBMITTED Stop
03/05/2008 ANY ZONING-DECISION LETTER REVIEW Stopped
03/05/2008 ANY ZONING REVIEW Stopped
03/05/2008 ROGER HOWLETT COT NON-DSD COMMUNITY PLANNING Stopped
03/10/2008 JIM EGAN COT NON-DSD FIRE Approved
03/13/2008 JOE LINVILLE LANDSCAPE REVIEW Denied Submit a revised landscape plan showing the proposed revisions to sidewalks, covered parking, building outlines, revised bike parking locations, etc. as applicable and relocating plantings as necessary.
03/17/2008 JOSE ORTIZ COT NON-DSD TRAFFIC Approved
03/18/2008 LAITH ALSHAMI ENGINEERING REVIEW Denied Laith Alshami, Engineering and Floodplain Review, 03/18/2008,

TO: Patricia Gehlen FROM: Laith Alshami, P.E.
CDRC Engineering

SUBJECT: Tanque Verde Center
S04-032, T13S, R15E, SECTION 32

RECEIVED: Tentative Plat on March 06, 2008

The subject project has been reviewed. After checking with DSD inspector for this project, concerning the proposed modifications, the following was determined:

1. The revised Tentative Plat does not include all the field revisions that have already been made.
2. Some of the field revisions, whether shown on the plat or not, are not acceptable and need to be revised or removed and replaced if they have already been installed.

We recommend that the Engineer of Record inspect the project and evaluate the field changes. Any changes that are not acceptable and do not meet engineering standards or applicable codes, shall be pointed out and corrected in the field. Once the engineer of Record determines that the project is acceptable, he/she shall send a compliance letter to DSD Engineering requesting a DSD inspection. Once our inspector accepts the field modifications, a revised tentative plat shall be prepared accordingly and re-submitted to the DSD for review and approval. Please be advised that grading as-built plan can only be submitted after the revised Tentative Plat process is completed.