Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Requires Resubmit
Review Details: PERMANENT SIGN REVIEW v.1
Permit Number - TS-PRM-1125-00465
Review Name: PERMANENT SIGN REVIEW v.1
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 12/03/2025 | Commercial Building Standard | APPROVED | |||
| 11/10/2025 | Commercial Electrical Fast | APPROVED | |||
| 11/10/2025 | Outdoor Lighting Standard | APPROVED | |||
| 11/24/2025 | Signs Standard | REQUIRES RESUBMIT | Sign Review TS-PRM-1125-00465 3205 N. Campbell Ave. Plan review for the above referenced structure has been completed by Tami Goltz. This letter reflects comments to be addressed. Additional comments may be provided in subsequent reviews. Code reference: Unified Development Code, Article 7A: Sign Standards, adopted Outdoor Lighting Code, adopted Building Code. Please feel free to reach out with any questions you may have. Tami.Goltz@tucsonaz.gov or 520-837-5049. 1) Please note the building frontage amount for this site on the site plan so that allowed square footage can be determined. 2) Per section 7A.10.2.C.2.a.1.ii.a, low profile signs are limited to two faces per sign. The proposed sign has 4 proposed sign faces. Please reduce the number of sign faces to 2. 3) The site plan does not show the dimensions of the SVT as required by Section 10-01.5.0 Sight Visibility of the UDC. Please review this section and show the sight visibility triangles as required on the site plan for both the freestanding sign as it applies to the intersection of the two-way through street and the directional sign as it applies the the driveway intersection adjacent to the sign. 4) The site plan is missing the setback distance of the leading edge of the directional sign to the face of the adjacent curb. Please add this dimension. 5) Please recalculate all dimensions so that they are in feet.decimal, not feet and inches. |