Permit Review Detail
Review Status: Requires Resubmit
Review Details: PERMANENT SIGN REVIEW v.1
Permit Number - TS-PRM-0726-00268
Review Name: PERMANENT SIGN REVIEW v.1
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 07/28/2026 | Commercial Electrical Standard | APPROVED | |||
| 07/28/2026 | Outdoor Lighting Standard | APPROVED | |||
| 08/10/2026 | Sign Post Review Express | PENDING ASSIGNMENT | |||
| 08/07/2026 | Commercial Building Standard | REQUIRES RESUBMIT | Please submit your revised documents and provide a letter with a written response letter addressing each of the comments indicating how the Review comments were resolved. Please note the submittal was incomplete and the plan review was conducted using the information presented. The subsequent review could generate more comments after original comments have been addressed. Please contact me if you have any questions about the below comments. I can be reached at email mark.masek@tucsonaz.gov 1. Please provide structural engineering calculations and a detailed anchoring pattern for the proposed wall signs as they are over 30 feet high. The submittal must demonstrate that the chosen fasteners (type, size, and quantity) are sufficient to resist wind and dead loads per 2024 IBC Chapter 16]. Please provide the following specific information Specific Requirements: A. Anchoring Pattern: Provide an elevation view showing the exact location and spacing of all fasteners. B. Substrate Capacity: Verify the capacity of the fasteners (e.g., expansion anchors, lag bolts, or toggle bolts) when installed into the specific wall substrate (brick, stucco, wood, etc.). C. Fastener Specifications: Clearly identify the fastener material (must be corrosion-resistant), diameter, and minimum embedment depth." 2. Special Inspection of Wall Signs A. Sign anchors for signs over 30ft above grade to include all types (concrete anchors, epoxy, thru-bolts etc) will require a special inspection. B. Please provide the special inspection certificate with Part A, and Part B, completed with next submittal. IBC 107.2.1 https://www.tucsonaz.gov/files/sharedassets/public/v/1/city-services/planning-development-services/documents/special_inspection_certificate.pdf Please contact me if you have any questions about the above comments. Mark Masek Plans Examiner – Building Safety Planning and Development Services | City of Tucson main 520.837.4994 email mark.masek@tucsonaz.gov |
||
| 08/10/2026 | Signs Standard | REQUIRES RESUBMIT | FROM: Georgia Pennington, Lead Planner DATE: 08/10/2026 COMMENTS: 1. Provide the City of Tucson Special Inspection Certificate with Parts A and B completed. The form can be found here: https://www.tucsonaz.gov/files/sharedassets/public/v/1/city-services/planning-development-services/documents/special_inspection_certificate.pdf 2. Provide an active City of Tucson business license for the contractor/installing sign company. 3. Provide sealed structural drawings and calculations for the proposed sign installation, prepared by an Arizona-registered design professional. The structural drawings must include the wall type, connection type, fastener type, fastener size, number of fasteners, spacing, and attachment details. If you have any questions, please contact me at Georgia.Pennington@tucsonaz.gov. |