Microfiche records prior to 2006 have not been completely digitized and may not be available yet on PRO. If you can not find what you are looking for please submit a records request.
Permit Review Detail
Review Status: Requires Resubmit
Review Details: PERMANENT SIGN REVIEW v.3
Permit Number - TS-PRM-0625-00275
Review Name: PERMANENT SIGN REVIEW v.3
Review Status: Requires Resubmit
| Review Date | Reviewer's Name | Type of Review | Description | Status | Comments |
|---|---|---|---|---|---|
| 07/22/2025 | Commercial Building Standard | APPROVED | |||
| 07/11/2025 | Commercial Electrical Standard | APPROVED | |||
| 07/11/2025 | Outdoor Lighting Standard | APPROVED | |||
| 07/16/2025 | Signs Standard | REQUIRES RESUBMIT | Application: 1) Sign Permit cannot be approved until building permits TC-COM-0225-00215, TC-COM-0225-00216 are paid for and issued. Resubmit once this has been completed. Sign Drawings: 1) All dimensions must be FEET.DECIMAL - not FEET INCHES 2) Add Required exact copy to all illuminated signs: All signs and power supply components are UL listed. All signs shall have UL sticker, manufacturer sticker and installer sticker, located on the exterior of the sign for inspections. All dedicated sign circuits shall be labeled. A safety lock out shall be provided for all signs where the shut off switch is not directly visible to the sign. 3) Indicate location of the electrical disconnect switch. 4) Add detail note stating "No onsite welding to be performed". 5) Specify the material of the existing canopy frame. 6) Specify the anchors that are used to hold the letters to the canopy. Site Plan: 1) Per 7A.10.C.1.a.2 Access point signs cannot be located within the SVT and must be set back 10' from the face of the curb. Move sign J out of SVT and revise setback dimension. 2) SVT required dimensions are 20' x 345'. Revise dimensional call out to reflect required dimensions. |